¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: 2A amperage draw on TX, but no RF out

 

Mike, check the pins against those in the BITX on the BOTTOM of the board.

If they match, this relay will work. It has the same specs as the Virtual relay.
The 2 end pins are the coil. The two pair of 3 pins are the contacts, with the common
in the middle (But that would have to be verified -- there are variances).

john
AD5YE
Join [email protected] to automatically receive all group messages.