开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: the device is operational!

 

Inline image 1Keith, I had the same problem with the USB cable. The 90 degree left or right would not come close to working, a right angle up or down worked great.You need 9/16 inches between the female USB shell and the pot for it to fit if you install it and then install the pot. Just have to spend a little more time looking as they are less common.

On Sun, Aug 20, 2017 at 2:24 PM, Keith VE7GDH <ve7gdh@...> wrote:
I installed a 10-turn tuning pot yesterday. I borrowed a knob with a "spinner" from an old Drake VFO. It is nice to use, but it's too close to the PTT (toggle to talk) switch. I keep bumping the tuning knob. I'll be changing back to a smaller knives. The shaft on the tuning pot is 1/4" (6.35mm) and not 6mm. It's much more difficult finding a knob that I like that fits a .25" shaft.

Oh yes… the 90° USB cable doesn't fit between the Raduino and the tuning pot. On the next one, I'll change the spacing.

--
73 Keith VE7GDH
Join [email protected] to automatically receive all group messages.