Re: W8TEE Software Release 1.05
|
Thanks, David. Can you send me the ID numbers and the code that properly repositions them. My guess is that you did that in setup(). If so, just send me the setup() code and I'll work it into the code and return it to you just to make sure I did it correctly.
Jack, W8TEE
From: David S via Groups.Io <dcsuk10@...>
To: [email protected]
Sent: Thursday, August 3, 2017 11:26 AM
Subject: Re: [BITX20] W8TEE Software Release 1.05
Hi Jack
An "Anomaly" report. ?Code version 1.05, I see you made some big changes in the screen size selection. ?I've got 2 3.5" displays ,from the same vendor about 3 weeks apart, that have different ID's. ?I've added extra case statements for each that correctly increase the displayed size and the colours are correct. ?There's a small difference in the relative positioning if the WPM text between "small" and "large" screen selections. ?With the "small" screen the WPM is correctly positioned within the box whereas with the "Large" screen the WPM is low and left of it's correct position. ?See the photo's.
On version 1.03 I tried to see how the smeter functioned, when I altered the needle position I found it changed it's alignment and "cut into" the meter scale when at the higher levels.
Thanks Jack
&3's David G8DJM
|
