¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: No RF Power Output From Bitx40

 

Before you yank out the IRF, do this check:

Power the board and final, disconnect MIC and with PTT pressed check if 12V is getting to the IRF drain.

At 09/07/2017, you wrote:
I have some IF510's on order. I hope that's the problem because it will be an easy fix. It's worth a shot.

I've never tried transmitting with this radio without a dummy load attached.
Join [email protected] to automatically receive all group messages.