¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: No RF Power Output From Bitx40

 

On Sat, Jul 8, 2017 at 12:01 pm, Vince Vielhaber wrote:
I used the CW trick (part of the
recent Raduino mods) with the 10K resistor but instead of hooking up the other end of the resistor to the raduino, I hooked it up to a 100K pot to 5v thru a switch. Switch off, the BitX operates normally. Switch on, the BitX sends a carrier, of whatever power you want based on where the 100K pot is set, when you hit the PTT.
Excellent idea Vince!
I'll include this suggestion in the "user instructions" of the raduino software.

73 Allard PE1NWL
Join [email protected] to automatically receive all group messages.