Re: Bitx40 All done
|
Jack Purdum
I think some projects look?kinda cool with a clear case.? Jack, W8TEE From: pat griffin <patgriffin@...> To: [email protected] Sent: Friday, July 7, 2017 10:16 AM Subject: Re: [BITX20] Bitx40 All done My solution was to mask the portion of a piece of plexiglas where the lcd would go and paint the rest of the plexiglas black. ?Then mount the lcd behind the previously-masked and now clear part. ?The controls are?mounted on the black part. ?The advantage
is no cutting. ?The disadvantage is you have to remember it is plexiglas!!
73,
Pat AA4PG
Pat Griffin
http://www.cahabatechnology.com/aa4pg.html
From: [email protected] <[email protected]> on behalf of Sean Barton via Groups.Io <kb0ovd@...>
Sent: Friday, July 7, 2017 7:54:41 AM To: [email protected] Subject: Re: [BITX20] Bitx40 All done ?
When I did mine someone recommended using a wood chisel to make the cutout.? I got a set of cheap chisels from Harbor Freight and clamped the panel between a thick
piece of steel as a sacrificial backing and a straight edge.? I laid the flat part of the chisel along the straight edge and started making a series of shallow cuts until I made it through the material.? I was a little off on my measurements but otherwise
I think it turned out pretty well.
Sean
KB0OVD
On Friday, July 7, 2017 7:42 AM, Jack Purdum via Groups.Io <econjack@...> wrote:
I've used a fret saw, too, and it works pretty well. I draw an outline and use C clamps to hold a small metal bar on the line to prevent
the saw from drifting outside the cutout. That and a little work with a file does pretty well. It's still nice to have a bezel though.
Jack, W8TEE
From: Raj vu2zap <rajendrakumargg@...> To: [email protected] Sent: Thursday, July 6, 2017 11:57 PM Subject: Re: [BITX20] Bitx40 All done I always drill 4 holes on the inside of the window lines and use a hand fret saw to cut the center out.
Then you need some elbow grease to make the hole neat. Now if you can get a bezel for the display, then you are in business! At 07/07/2017, you wrote: >Aperture all within display outline, so a file and a bit of judicious 'elbow-grease' would cure any uglies. All those extras! Well done!
|