I'm running 2.6 and the only difference is there are now five icons having to do with the object. The second one shows two vases (if that's what those things are), one large and one small. That's the Scale icon. There's no badlock but there is a checkbox for Uniform Scale.
Vince.
toggle quoted message
Show quoted text
On 06/23/2017 02:37 PM, Doug W wrote:
On Fri, Jun 23, 2017 at 11:22 am, bjorn wrote:
Hi Doug,
How did you scale? In Cura? I went through all menues but cannot
find any such opportunity.
I would love to learn how!
Bjorn.
I scaled in Cura. I am using an older version, 14.09 so this may not be
how it works in the newest version. After you drop your object on the
platform, click on it. You should now see three icons on the bottom
left of the platform. The middle one is scale. Click it. In the box
that opens make sure you have uniform scale locked by clicking the
padlock closed. This will apply your changes to X,Y and Z. Now that
your scaling is locked you can enter a multiplier in any of the top
coordinate boxes overwriting 1.0.
--
Michigan VHF Corp.
