¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: opps...

philip yates
 

Its Yellow wire GND connection for the tuning pot on connector P1 that i managed to short to +12v.?
So where do I find the correct bit of code to modify. Its still running v1.10 for now.

Thanks

Phil - G7BZD

On Sat, Jun 3, 2017 at 5:03 PM, Ashhar Farhan <farhanbox@...> wrote:
you have probably blown the analog line, move to another analog line, recompile the arduino sketch to use the new line.

- f

On Sat, Jun 3, 2017 at 9:27 PM, philip yates <phil@...> wrote:
I just managed to short my Raduino tuning connection ( yellow wire ) to 12v, display still works, but its
tuning low at 6.78 or thereabouts, unresponsive to the pot.

Any ideas if its a fixable issue, no other damage as far as i can see.

Just had one of those days, decided it would be far safer to un-plug the soldering iron for now.

Phil - G7BZD



Join [email protected] to automatically receive all group messages.