开云体育

Joe,

Thanks for your reply.? I thought I saw your QRZ station pictures a while back!? I was surprised when I saw you where in the contacts! ?

Mainly the first time on JT65 for me in the receive mode.? I have a few Nano PCB's here and I set up my DDS with a inline headers so I can pop a Nano in for quick comparisons. I have v1.11. ?

Bitx here is getting power from a 12v 18AH sealed lead acid battery.? JT65 is loaded into my old laptop running XP.?

I'm dragging my feet on putting the BITX40 into box!? Mods are coming faster than I get around to installing them Hi?

73

Larry ?WA9DOH

On Tue, May 16, 2017 at 11:31 PM, Joe <joeman2116@...> wrote:

LARRY,

Will keep an eye open for your jt65 transmission.
Rig is on most times
Just with casual usage, I have 80 contacts on jt65..... Lots of fun
Running raduino v 109 but will be moving to 112 on its release.

73
Joe
VE1BWV

On Tue, May 16, 2017, 10:10 PM Larry Smith <815cpu@...> wrote:

For what it’s worth:

This morning finally managed to get the BITX40 to receive JT65 (with help from longtime friend: K9HWL).

My second attempt I set the WSJT-X software tuned to 7.076 USB and nothing.

Then I heard something and looked up watched a QSO exchange!!

WD4RC? ?CQ??? AL

M0ZCW ???England

W8KHR ???Ohio

VE1BWV ?Canada? ??I think I’ve read your BITX40 emails? JT65?

W1GQQ??? ?NH

US1CR ????Ukraine

My trap 80-10 dipole is up 10’ and level E/W

Now on to making the CW mods for the BITX40? -? JT65

Just thought to pass on my this step with the BITX40

Thanks to Allard PE1NWL for all he’s doing.

73

Larry ?WA9DOH

On Fri, May 12, 2017 at 8:05 PM, Allard PE1NWL <pe1nwl@...> wrote:

I've just released raduino v1.10, download it from

Some minimal hardware (a few resistors and one PNP transistor) is required to fully use the new functionality.

New in this version:

• added CW functionality (for straight morse key). This function can also be used just for tuning up. This requires the CW-CARRIER line connected to Raduino output D6 (connector P3, pin 15). (see for wiring instructions). The morse key itself shall be connected to Raduino pin A1 (brown wire). Both sidebands (CWU or CWL) are available for CW operation.
• Semi break-in for CW This requires the TX-RX line from Raduino output D7 (connector P3, pin 16) to override the existing PTT switch using a PNP transistor. (see for wiring instructions)
• CW side-tone This requires some wiring from Raduino output D5 (connector P3, pin 14) to the speaker. (see for wiring instructions). The desired sidetone pitch can be set using the Function Button in the SETTINGS menu.
• Frequency tuning is disabled during TX (to prevent flutter or "FM-ing" during TX). This requires the PTT SENSE line connected to pin A0 (black wire). (see for wiring instructions).
• Please carefully read the updated user instructions:
  
  

73, Allard PE1NWL