Go easy on me! First post and first homebrew project...
Step 2 of the BITX40 wiring up instructions says that 'the DC power from the socket goes to the board ?through the on/off switch on the volume control', but then later in step 2 it says that 'you may route the positive power line through the ON/OFF switch on the volume control' making it sound optional or that it requires some additional configuration.
So, if you follow the default instructions in steps 2 and 4, is the DC power routed through the volume control via the PCB board, or do you need to do this yourself by wiring the DC socket to the volume control and then from there to the board?
Thanks in advance!
