¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: Raduino using V1.09 tuning clicks

 

Phil,

did you perhaps accidentally upgrade the si5351 library to the latest
version 2.0.4?
(some IDE's automatically upgrade libraries when a newer version is
available).
It is a known fact that the latest library versions cause tuning clicks.
Make sure you are using the older version v2.0.1.

The si5351 library v2.0.1 can be downloaded from


Then compile the sketch again using this library.

73 Allard PE1NWL

On Sat, May 13, 2017 10:05, philip yates wrote:
Just loaded v1.09 to my Raduino, and I now get tuning clicks.

The Raduino has been modded with the capacitors and a 56ohm resistor, it
was all quiet

after the mod and pre-v1.09. Just out of curiosity I loaded v1.09 to my
original modded Raduino

and that now also has the clicks back.

So does anyone have any other ideas, another mod to clear the clicks I had
already modded away.

And for those reading this, yes I have managed to get 2x Raduino running
v1.09.

Phil - G7BZD
Join [email protected] to automatically receive all group messages.