Re: VFO/BFO selecting outputs
|
Well, got the coax attached and all I
get is birdies, no RX. Not sure why. I can see the BFO clk
running. I removed the xtal and attached the coax as in here:
/g/BITX20/topic/4703461#24270
I didn't make any other changes to the code, which I may need to
for LSB/USB operation. Unfortunately I ran out of time and have to
take off for mt 48 hour work shift, so I won't be able to dig into
it until Wednesday aft. Any suggestions as to where to look?
Thanks!
Jonathan
toggle quoted message
Show quoted text
Good!
I had borrowed that code from Farhan's original script, which
compiles with the older etherkit library.
All three of the lines of code I gave you should either
reference CLK0 or CLK2, I gave you a mix. ?The Raduino with
cabling as delivered and described in the Wireup uses CLK2 for
the VFO. ?So I'd guess most people will want to use CLK0 for the
BFO.
On Sun, Apr 9, 2017 at 01:46 pm, Jonathan Peakall wrote:
Got CLK2 going!
?
_.
|
