开云体育

Hey Jack, who was the guy selling bezels for these displays, I thought I bookmarked it but can't seem to find it.

Joel?

KB6QVI

On Jan 24, 2017, at 1:48 PM, Jack Purdum via Groups.Io <econjack@...> wrote:

I like this one:

for $5.50, as it uses the I2C interface. That means you only have two data lines to connect, plus power and ground. It leaves more I/O pins free for other things. Terry King runs the place and is good people. He also has software examples for the display on his web site.

Jack, W8TEE

---

From: "r.rking41@..." <r.rking41@...>
To: [email protected]
Sent: Tuesday, January 24, 2017 4:22 PM
Subject: Re: [BITX20] RADUINO

?Where can you get the blue display ? Cost and part nr ?

?

?

On 01/24/17, philip yates<phil@...> wrote:

?

Also received mine, will be moving the pot to the other side of the PCB as well.

Think I would prefer a blue display as well, will then match my QRP Labs U3.

Now to find a case to put it all in. Jury rigged on bench at the moment.

Phil G7BZD

On Tue, Jan 24, 2017 at 6:20 PM, Joel Caulkins <caulktel@...> wrote:

I received my Raduino today, Yippee! The two things I did first was to change the green display to a blue one, and move the contrast pot to the back of the board so I can actually adjust it while looking at the display. It works perfect and is only off frequency by about 200Hz which I will calibrate once it's in the case. Well worth the additional $14.

Joel?

KB6QVI

On Jan 24, 2017, at 9:57 AM, kq2q2000 <kq2q@...> wrote:

thank you Jared. Will do!

Bob? KQ2Q