I did something similar with my zBitx.? I have attached a PDF of the pictures so they are not lost during the purge required to maintain the maximum group size.
?
The heatsinks are adhesive-backed from Amazon:
?
I bought 4 to cover most of the back of the zBitx.? Three are required.
?
To get the required holes in the heatsink, I positioned it with the glue cover still attached and pressed on it to make an impression in the foam/cover.? After I had made a pilot hole, I used a 3/8" drill to drill out the holes.? I started with the heatsink over the two MOSFETS, drilled and placed the first, added the undrilled heatsink in the center, and used the pressure measuring process to get the hole for the last heatsink.?
?
The last step is to add the stand.? I used one I had left from another project where I only needed one.? They were bought on Amazon:
?
I do not know how long the kickstand will stick.? Time will tell.
?
The above is provided as a suggestion, with no guarantees.
?
73
Evan
AC9TU
?
