Try this. I have seen this happen.? Select the mode and don't keep clicking it with the stylus. But highlight the mode and then use the knob to go up or down to select the mode. Should bring up the correct ft 8 screen?
Hello.
The update doesn't work, I only get a gray lcd, and nothing
on the computer.
I got a USB cable with a C type with the station.
So I used what I have
at home.
It asks if there needs to be a special cable for the update.
When working as FT8, I get a signal, but no decoding.
So I don't see
the signs of the stations I hear.?
What am I doing wrong.?
Matjaz
S56ZVD
Leo Aniol, AI5II via je 4.
04. 2025 ob 16:57?napisal:
1). Wsjt-x only receives data if the Zbitx display is active
on? my monitor.?
2). Cannot manually start rigctl if I shutdown the zbitx
display. Rigctl returns network connection error.
3). With the? zbitx display window open and wsjt-x running
and the mode set to digital, I cannot use the zbitx display to
change bands. Band change only works if it is done via wsjt-x
4). When changing bands on wsjtx the zbitx display shows the
correct band reflecting the change but wsjtx does not.
5). Receive works fine BUT cannot transmit/tune from wsjtx. I
can transmit and tune from the zbitx display window but not from
wsjt-x.
?
NEED HELP with number (5) and clarification with what is
going on with rigctl.
I'd like to be able to start rigctl from CQRLOG and then run
WSJT-X without having the zbitx display active if that is
possible?
?
Thanks,
Leo? AI5II
