John
Don't worry about the nuts on the jacks.? I had the same
"problem".? Can't remember about the volume control, but it's all
rigid, so there's no problem with operating the radio.
Your posting is OK.? You're actually the 1st one I have seen
posting about this issue.? This is what the group is for - to
bring up any ideas or issues that anybody has with his (or her)
set.
Incidentally, I have 2 uBit 6s, and a few sBits.
Gerry Sherman
Sent by the Windows 11 Thunderbird
On 2024-11-16 03:24, John Giroux via
groups.io wrote:
toggle quoted message
Show quoted text
I'm new here, so hopefully I'm posting this correctly; I just
bought the uBITX V6 kit and have assembled it with no issues
other than the fact that the volume control as well as the key,
headphone, and microphone jacks don't extend far enough past the
front panel to thread any of the nuts on.? Have others
experienced this issue, or am I missing something - the way the
PC board attaches as well as how the cabinet goes together
appears to leave no room for any adjustment such that they can
protrude any further from the front panel.
Thanks in advance for any responses.
?
73,
John N2LCX
