Re: New sBitx V3 3D printed wedge feet

barry halterman All Messages By This Member #110395 开云体育 I printed up the foldable leg stand with PTA and have had the top of the leg bracket break off from the support, right at the screw. ?This area seems too fragile if the legs are extended? to the bracket stop. Barry ? Sent from for Windows ? toggle quoted message Show quoted text From: Jared Wellman Sent: Thursday, April 4, 2024 10:15 AM To: [email protected] Subject: Re: [BITX20] New sBitx V3 3D printed wedge feet ? Bob, I have been using? your fixed fixed design since I received the sBitx, it has worked well!?? My design uses the sBitx as a cantilever with the rubber feet going into the base to provide the support end.? So stability is provided by the length of the 3d printed feet and doesn't need a back brace.? I went through a couple of iterations of "too short...too long" before I settled on the current size which is pretty stable.?? Jared ? 00042EEEFC8F4F8E9E218F788443B5B6.png 1AB67323C0C348C0A1FDA1662A80717D.png

Join [email protected] to automatically receive all group messages.

开云体育