Re: V1 sBITX 3d printable case released!
|
Thanks for excellent work. My print turned out great.
Joe
VE1BWV?
On Sun, Jan 21, 2024, 3:05?p.m. Mark Hatch < mark2382@...> wrote: Hi,
Just finished and tested my 3d printable case for the sBitx motherboard. This is based on the OEM case design from HF Signals and leverages the original work done by Mike (KW1ND).?
The preferred download is from my github at:?
In the? sBitx-case-3d-printer-files directory you can download individual stl files (and the Fusion 360 archive). Or you can go to:
Click on the CODE drop down in upper right and download all my3d printing designs.
This work is also hosted on Thingiverse at:
The github directory has detailed instructions and this is also provided as a pdf on Thingiverse that you can download in the files section.
This design in not perfect as the holes for the RaspberryPi are about 1mm too high. This results in a slight tilt to the RaspberryPi. I will fix this in the next version.?
There is also no attachments for an internal speaker provided (although there is a grill area for the speaker to the left of the RaspberryPi.) I have some possible candidates for a speaker coming from Amazon, if they work out I will re-release the design with the proper holes and provide the link if you want to buy the speaker (direct, not a referral link ;-) )
I also want to add a brace -- like what Elecraft provides for their KX2/KX3 -- so the sBitx can tilt back slightly.
Let me know what you think!
73
Mark
 
--
AJ6CU/7
KD8CEC 2.0, Nextion Screens,? and open source uBITX Raduino boards for Arduino IOT, BLE, RP2040, Teensy 4.0, and Raspberry Pi Pico
|
