I found your design pretty much spot on. Of course there was the usual off by 0.5mm stuff. But that goes with the territory when you are manually recreating a design. The only issues I remembered was that the V3 Kit's button was slightly larger than the design and that the pho/mike/keyers plugs were off 1mm one way or the other horizontally. Pretty minor stuff! I figured your design saved me probably at least 3 days in the cycle of measuring, printing, correcting, repeat...? With a box the size of the sbitx case, it takes 5 hours tor print with a .6 nozzle!
73
Mark
--
AJ6CU/7
KD8CEC 2.0, Nextion Screens,? and open source uBITX Raduino boards for Arduino IOT, BLE, RP2040, Teensy 4.0, and Raspberry Pi Pico
https://github.com/aj6cu
