On Tue, Dec 26, 2023 at 11:36 AM, Ashhar Farhan wrote:
The hw_settings_v3.ini has to be copied over to hw_settings.ini if and only if you have v3 hardware and you have messed up the supplied hw_settings.ini. It has been included for peeps who might upgrade from v2 to v3 circuit.
This should be interesting for people who have more than one sbitx with more than one version.
These are the kinds of issues one gets as the product gains popularity.
I believe there is at least one person on this list with both a DE and a V2.
I will have both a V2 and a V3 since I have ordered a board-only V3.
My plan is to keep one sbitx in the shack without a touchscreen to hack on, and the 2nd to be in the factory case with touchscreen for POTA.
I have learned enough about the laser cutter to think about making a case for the board-only sbitx, just to keep it protected from coffee spills, etc.
Since I intend to be changing the software frequently, I will need to make a way to check that I am using the proper hardware settings for the current board and software.
--
Regards,
Dave, N1AI
Dave, N1AI