Scott, I still have no rig control although I get audio and the WSJT-X can decode. Interestingly I no longer get a working WSJT-X waterfall...it's black, even with decodes. I've rechecked the audio input and output selections. My WSJT-X works fine on my uBitx with an outboard dedicated Raspberry Pi, but that one is version 2.3.0. The sBitx version was 2.4.6. I even removed the 2.4.6 through preferences add/remove software and reinstalled the 2.3.0 version (that was the only choice) and it still doesn't connect with rig control--no frequency (stays red) and not tune function. So I uninstalled in and reinstalled WSJT-X and this time the only choice was 2.0.0 ! And still no rig control. Ive tried to install manually versions 2.6.1 and 2.7.0-rc2 but apparently there are dependency problems preventing installation. This is with my DE, but I have the same rig control problem with WSJT-X on my V2, running the same updated image.
I can transmit fine with the embedded FT8 mode, and at full power (the DIGITAL mode gave only 3 watts output, WHEN WSJT-x was working with rig control connection 2 days ago...and that problem has been reported by others) but I might as well just use FT8 with my uBitx which DOES work with WSJT-X at 3.5 watts, and which I used to work a station yesterday. But the FT8 with the sBitx? is hard to read with small letters 4 feet away, even with an external monitor, especially the blue call letters. There must be a way to get back rig control with WSJT-X on the sBitx. It was working before. I don't know what setting or other workaround I'm missing.
Jack, N6LN
John Terrell, N6LN