No problem, there are also "off-the-shelf" ones. I'll choose one and test.
tks!
toggle quoted message
Show quoted text
On 4/17/23 11:29, Ashhar Farhan wrote:
I built one with an Arduino nano, a 10uf cap and two resistors. Not sure where I saw the circuit diagram.
- f
On Mon, Apr 17, 2023, 1:57 PM Rafael Diniz <rafael@...> wrote:
Thanks Ashhar, there is what I thought. Btw, which "burner" do you
use
to write the firmware to the ATTiny85?
Rafael
On 4/16/23 22:09, Ashhar Farhan wrote:
> Ah,? a good spot. I wanted to check how fast the adc works. If you
> see, the pin 5 is being flipped on each iteration of the loop.
So, I
> connected the pin5 to an oscilloscope to measure the time periods.
> It is cruft. It needs to be removed.
> - f
>
> On Mon, Apr 17, 2023, 12:11 AM Rafael Diniz
<rafael@...>
> wrote:
>
>? ? ?Hi Ashhar and all,
>
>? ? ?What does it mean this part of the code of the ATtiny85, I don't
>? ? ?get it:
>
>? ? ?--
>? ? ??? if(flag == 1){
>? ? ????? digitalWrite(5, LOW);
>? ? ????? flag = 0;
>? ? ??? }
>? ? ??? else {
>? ? ????? digitalWrite(5, HIGH);
>? ? ????? flag = 1;
>? ? ??? }
>? ? ?--
>
>? ? ?The example from Nicholas Zambetti does not have this:
>
>
>
>
>? ? ?Cheers,
>? ? ?Rafael
>
>
>
>
>
>
>
