Aaron
That depends on what you find and which modes are working correctly.? The USB value would be used if the rig were calibrated using USB.? If it were done using LSB, then LSB would be the correct value.? All should be the same.? Any that are zero should be changed to the valid value.
NOTE: Each Raduino mainboard combination can be different.? The values are adjusted to calibrate the master clock and adjust for the differences in the SSB crystal filter.
Be sure to save the values to a file before you change anything so that you can go back to the current settings.?
There is also a BFO tuning aid web page from Ashhar Farhan:
It does require a mic connected to your PC.
You stated that digital and SSB worked correctly, so I would not mess with the BFO tuning for the LSB or USB values.
A video can be used as guidance for the adjustment, though it was made for the stock v6 firmware.? The difference would be how to set the values.? The BFO tuning aid and the zero-beat process would be the same.
73
Evan
AC9TU
