开云体育

Sorry for not updating the thread. The issue actually had nothing to do with the radio. The battery I was using had a BMS that was behaving badly. It cut off way too early at the top and bottom end of

Thanks for the update. K5ILW

Hi all. Does anyone have a BASIC code plug they could share? I just purchased my 578 and I am having problems getting a working code plug. This unit is very different from my 878 in programming. I

W2LPC (name?) . . . I don't have a basic code plug for you, but if the 578 uses a similar scheme for the fields in the memory database, this might work. My brother and I have Anytone radios, one

You can export your 878 data using the CPS software and then import it into the 578 using the CPS software for that radio. Go to Tools>Export and click on Export All. It will save a file with a .LST

Hello all. I have a D578 Pro III and I downloaded the software from Anytone for my radio (they list two different versions). Anyway, when I run either program, when I go to write to the radio it says

You don't need the rtsystems software (money wasted). Click on this link and download the latestCPS software and Firmware

The RT Systems software is MUCH easier to use and isn't so finnicky about radio model and firmware version. I use it on all of my radios. Multiple Icom models, Anytone, 578 and 878, Yaesu, etc. Well

I never had any issue with anytone softwares and I've been using them for about 7 years. I only use RT system softwares for yaesu and icom radios.

Hello all. I have an older Anytone 878 with version 1.12 firmware. Can I upgrade directly to 3.03 without bricking my radio? Thanks in advance. 73 de' W2LPC, Lou.

I recently updated an 878UV from 1.21 to 3.02 with no problems.? Be sure you have your codeplug saved where you can find it to load into the new CPS program.? I don't think you'll be able to use

Alamogordo Amateur Radio Club Serving Hams In The Tularosa Basin And Around The World And Beyond AARCs' 38th Annual Hamfest 31 Aug Labor Day Weekend 2024 from 7am to 3pm-ish (depends upon

Hi all, First of all I'm glad you to accept me in this group. The issue I'm going to describe I've posted in another forums too (qrz.com and eham.net) but I cannot find any solution yet so I hope

Hello, Vic/Victor . . . <vjosesan@...> wrote: I don't have your setup so I can't help directly, but have you contacted the manufacturer or seller? If the seller was BridgeComm, who probably

Hi Donald, my name is Victor, EA4GRG, nice to meet you and thank you for your answer. My AnyTone bluetooth setup is the usual way I think. PTT BT button is paired fine and it works. I can pair with

Hi Victor, Make sure the volume is adjusted on both the HT and on the car audio system. Both have to be turned up enough to pass the audio through. 73 from Brian AA4BK

Hi Brian, mic and speaker gain levels are set to highest (5) in the HT. In the car audio system I cannot set anything because it no sounds. The HT are paired fine but it supposed that when radio (or

Has anyone else experienced this with their Anytone AT578 mobiles? After anywhere from 4-8 hours of leaving the radio on, If I try to TX on a DMR channel, it gets stuck with the red TX light on (it

Yes, I have experienced that as well as some other issues with this radio. If I leave it on for a few days, I cannot shut it down by simply pressing the power button. I have to keep pressing it until

Thanks. Bridge Comm is just a distributor of the radio. Anytone really doesn't listen to the users. It's too bad, they could blow everyone else away if they would only be proactive and reactive