¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: T41 high frequency weirdness


 

On 2025-03-20 12:19, K9HZ wrote:
What has changed?
*** Nothing!!!!!!!!!!!!!! That I know of. Well, obviously SOMETHING
has
changed, because it didn't use to do that.


- Jerry



DR. WILLIAM J. SCHMIDT - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ
PJ2/K9HZ VP2EHZ

Owner - Operator

Big Signal Ranch ¨C K9ZC

Staunton, Illinois

Owner ¨C Operator

Villa Grand Piton ¨C J68HZ

Soufriere, St. Lucia W.I.

Rent it: www.VillaGrandPiton.com [1]

Moderator: North American QRO Group at Groups.IO.

Moderator: Amateur Radio Builders Group at Groups.IO.

email: bill@...

FROM: [email protected] <[email protected]>
ON BEHALF OF jerry-KF6VB
SENT: Thursday, March 20, 2025 2:09 PM
TO: AmateurRadioBuilders <[email protected]>
SUBJECT: [AmateurRadioBuilders] T41 high frequency weirdness

My T41 has started doing something weird on 15M and 10M. On 10M, when
I
hit the mike button, I immediately get 6W out on my
Telepost 100LP - without talking into the mike!

I piped the output from the dummy load ( actually, a Bird 500W 30dB
attenuator ) into my Rigol SA. Signal at 28.350MHz looks reasonably
normal - carrier about 30dB down from voice peaks.

HOWEVER, when I increased the span, I found a giant spur at 33.305883
MHz. About 15dB taller than the proper output signal ( at 28.350MHz ).

If I go to 24.9MHz and transmit, the same sort of spur appears - at
32.305883 MHz.

If I go to 21.2MHz & transmit, the spur is at 27.9195 MHz. ( Telepost
says 2.7W )

If I go to 18.096MHz - no spur.

14.2MHz and below - no spur.

At a wide span, it looks like a nice clean peak. But if I crank down
on
it, it starts to get messy.

This is a latest-greatest V12, with the K9Hz BPF, LPF, and PA.

I connected the output of the RF board directly to the SA - no
constant
spur. Plenty of harmonics with no BPF or LPF though.

I can only conclude that the PA is oscillating:(.

As to why it doesn't oscillate on lower bands....some interaction
between the PA and the BPF & LPF?

- Jerry, KF6VB



Links:
------
[1]
[2] /g/AmateurRadioBuilders/message/6210
[3] /mt/111814954/243852
[4] /g/AmateurRadioBuilders/post
[5] /g/AmateurRadioBuilders/editsub/243852
[6]
/g/AmateurRadioBuilders/leave/11522011/243852/920863695/xyzzy

Join [email protected] to automatically receive all group messages.