The various test programs for the V12 radio can be found here:
https://github.com/DRWJSCHMIDT/T41/tree/main/T41_V012_Files_01-15-24/T41_V012_Software/T41_V12_Software_For_Board_Testing
-------- Original Message --------
On 12/26/24 5:40 PM, Greg, KM5GT via groups.io wrote:
Hi, the move to the new QTH is complete, most of the boxes are unpacked and I have a workbench again.? I am ready to start work on my V12 T41 again.? I've forgotten exactly where I left off in my testing, so I am starting with just the main and switch/encoder boards.? The I2C addresses look fine for both the audio adapter/hat and the front panel, so that part is working (again).? ? I've run the V12_Main_Board_Test code and the display test works fine but I can't get the test to advance to next section.? In scanning through the code I'm unsure if this code assumes the new switch matrix, or the old one.? I don't see any references to the I2C addresses for the new board, so my suspicion is the V11 switch matrix, but I may be wrong.? Does this software assume the new, or the old switch matrix?? And then, which software should I use from here for testing rest of the boards?
?
Thanks, in advance
------------------------
73, Greg, KM5GT
