¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Always tune till find certain threshold?


 

Hello,
?
Is there a way to force the tuning cycle to tune untill a certain threshold??
?
04 cell - I have read that its incremental to current SWR status, is this correct?
?
Cheers and thanks in advance.


 

/g/ATU100/topic/109022116


 

Hello and thanks for the reply.
?
So what is the least value the tuner tries to find?
?
What is the least value for cell 04? 00 will be accepted?
?
Cheers!


 

The best possible until it gives up.

73

Em qui., 17 de out. de 2024 17:43, CT2FZI via <ct2fzi=[email protected]> escreveu:

Hello and thanks for the reply.
?
So what is the least value the tuner tries to find?
?
What is the least value for cell 04? 00 will be accepted?
?
Cheers!


 

Hello Luis,

Cell 4 defines the trigger that starts auto tunning.??

It doesn't affect the ability of the ATU to find the lowest possible swr.?
The least value for cell 4 would be 10= 1.0:1, the perfect match . So? 00 is an? invalid number.? The minimum is 10 .

The default 13 is there for a good reason, I believe: to avoid unnecessary tunning almost all the time.?

If the unit is in front of you, after the best tuning, you can set it to manual. In my particular case, where the unit is 14 floors above my apartment,? without any remote control,? I have to set to a higher number, like 15 , 17, or 20.

73

Paulo?

Em qui., 17 de out. de 2024 17:43, CT2FZI via <ct2fzi=[email protected]> escreveu:

Hello and thanks for the reply.
?
So what is the least value the tuner tries to find?
?
What is the least value for cell 04? 00 will be accepted?
?
Cheers!


 

Dear Paulo,
?
could you share some details about your setup?
What antenna are using with the remote ATU?
Do you provide power for ATU over coaxial or via separate cable?
How do you solved thunderstorm protection?
?
73 de Zilvis LY2SS


 

Hello Zilvis,

Here are the Q&As:

What antenna are using with the remote ATU?

  • A doublet fed by a homebrew 450 ohs ladder line, 9.5 m each site center pole 7 m high and side supports 2 m, an inverted "V" setup. It is not perfectly alined or symmetrical because of the limited space on the top of the building. Between the antenna and the ATU-1000 there is: a 7 meters long ladder line, a 4:1 balun, a choke 1:1 balun and a 2-meter coaxial cable. The antenna is on the top of a 22 floors building. It can be tuned from 40 to 6 m, the better SWR on 40 m (1:1) the worse on 14 m (1.6:1).


image.png
Inverted V.jpg



Do you provide power for ATU over coaxial or via separate cable?
  • No power via coaxial cable, since it is already being used to carry remote AC and DC (+/-)? voltages con control remote antenna relays switches.
I am using a small 12v 1 A power supply using available AC power close to the antenna

How do you solved thunderstorm protection?
  • ? I do not solve it!
  • Probably the antenna, the baluns, and ATU, will be destroyed after a direct discharge, which has never happened on many years.? The ATU is grounded on the building structure (grounded ring required by regulations).

Best regards,

Paulo Bastos - PY1JDX

?



Em sex., 18 de out. de 2024 ¨¤s 10:57, Zilvinas, LY2SS via <zilvinas.atkociunas=[email protected]> escreveu:

Dear Paulo,
?
could you share some details about your setup?
What antenna are using with the remote ATU?
Do you provide power for ATU over coaxial or via separate cable?
How do you solved thunderstorm protection?
?
73 de Zilvis LY2SS