开云体育

Hi all, is anybody could point to the exact hex value change datasheet? Where I can see which value does what.?

Thank you.

Hi, The user manual can be found in the following link.

There is minor changes for 3.1 and 3.2 and these are covered in the following link.

73, Dave

Hi, One additional point. Some ATU100's are shipped with the PIC protected. This means that it will not be possible to write to the EEPROM.
The reference firmware can be programmed into the PIC and then the EEPROM values can be updated as required. The default values may need to be updated for the OLED display. See attached thread.
/g/ATU100/topic/97089231#2111
73, Dave

Hi Kestutis,
I append a PDF with explanation of cell-contents, so you see, what you need....
Good luck and 73
Immo, DL5KB