开云体育

Hello,
I bought a ATU-100 from ebay. It is one that operates off of internal batteries. It works pretty good and the only issue is that it has an inverted OLED display.

I took off the front panel hoping that I could just flip it and i looks more complicated than that

I contacted the seller and it appears like he is gone with the wind. As I said it works pretty good. Is it possible to flip the OLED? Also if it is possible would it be a complicated procedure??
Thank you

Hi,
no need to flip the display physically…
there’s a parameter on the config for.
you need btw to program the pic, and need then a programmer (pickit2 or 3)
Look on the old group posts, there’s plenty of information for.

cheers

ok I have everything to program it, I did the QRP mod so I may have made a mistake.?
Thank you

i fixed it. It was in the programming
Thanks for the help

I would think it would be much easier to just flip the screen.
Dean - KC9REN

Hi Aaron. Care to share what you did to fix this issue.Or where you found the fix.
I am having the same problem.