Hello all,

I am a bit confused by the dozens of offers one can find on internet for an ATU100, is there a "trusted seller" that you would recommend ? Alternatively, are they all good or are there suppliers to definitely avoid ?

Also I want to double check, is it OK to operate the ATU remotely ? It is to put on a boat so the ATU will be below deck where the antenna exits which is hard to access, the plan is to simply switch on the power supply before operating and to let the ATU do its work.

73s

Yannig, F4IUJ

Am 17.11.2021 um 14:23 schrieb Onno PA1AP <pa1ap68@...>:

?

I am using DC through coax and it works. You only have to set the tuner to "auto" once and it will remember this setting until you perform a reset or push another button.?

Regarding reliability I have no information.?

Regards Onno

Op wo 17 nov. 2021 14:20 schreef Yannig - F4IUJ via <yannig.robert=[email protected]>:

Hello all,

I am a bit confused by the dozens of offers one can find on internet for an ATU100, is there a "trusted seller" that you would recommend ? Alternatively, are they all good or are there suppliers to definitely avoid ?

Also I want to double check, is it OK to operate the ATU remotely ? It is to put on a boat so the ATU will be below deck where the antenna exits which is hard to access, the plan is to simply switch on the power supply before operating and to let the ATU do its work.

73s

Yannig, F4IUJ

Hi Onno,

how did you build the feeding splitters?

I want to replace my SGC tuner by an ATU 100 and save a little amount of copper hi.?

Vy 73 de

Rolf, DL8BAG

Am 17.11.2021 um 14:23 schrieb Onno PA1AP <pa1ap68@...>:

?

I am using DC through coax and it works. You only have to set the tuner to "auto" once and it will remember this setting until you perform a reset or push another button.?

Regarding reliability I have no information.?

Regards Onno

Op wo 17 nov. 2021 14:20 schreef Yannig - F4IUJ via <yannig.robert=[email protected]>:

Hello all,

I am a bit confused by the dozens of offers one can find on internet for an ATU100, is there a "trusted seller" that you would recommend ? Alternatively, are they all good or are there suppliers to definitely avoid ?

Also I want to double check, is it OK to operate the ATU remotely ? It is to put on a boat so the ATU will be below deck where the antenna exits which is hard to access, the plan is to simply switch on the power supply before operating and to let the ATU do its work.

73s

Yannig, F4IUJ

?

I used the attached schema as the reference. It works well. Regards Onno

Op wo 17 nov. 2021 14:44 schreef Rolf Schroeder <rolf@...>:

Hi Onno,

how did you build the feeding splitters?

I want to replace my SGC tuner by an ATU 100 and save a little amount of copper hi.?

Vy 73 de

Rolf, DL8BAG

Am 17.11.2021 um 14:23 schrieb Onno PA1AP <pa1ap68@...>:

?

I am using DC through coax and it works. You only have to set the tuner to "auto" once and it will remember this setting until you perform a reset or push another button.?

Regarding reliability I have no information.?

Regards Onno

Op wo 17 nov. 2021 14:20 schreef Yannig - F4IUJ via <yannig.robert=[email protected]>:

Hello all,

I am a bit confused by the dozens of offers one can find on internet for an ATU100, is there a "trusted seller" that you would recommend ? Alternatively, are they all good or are there suppliers to definitely avoid ?

Also I want to double check, is it OK to operate the ATU remotely ? It is to put on a boat so the ATU will be below deck where the antenna exits which is hard to access, the plan is to simply switch on the power supply before operating and to let the ATU do its work.

73s

Yannig, F4IUJ