开云体育

I found the file that I forgot to upload, to make the MPLab project appear.? I also found a defect in my code that I had to create to replace the MikroC library.? I also added debugging code to run

Hi John I had a similar problem on the capacitor side of the tuner. I used my NanoVNA on SWR mode and stepped through the entire capacitance range using the test mode, this isn't measuring anything in

Thanks. I ordered a new PCB via Paypal. I already bought the fet switches from you awhile back. -Steve K1RF

The total for one of Glenn's 0805 ATU-10 boards is $5 postpaid in the USA. I also have the AO6604 FET switches 20x for $3 if ordered with a board. 73 Kees K5BCQ

No KeesNothing yet.Glenn?Sent from my Samsung Galaxy S7 smartphone.

MCC is an plugin for the mplab ide. It can be installed through the ide environment. It's pretty nice actually because it installs the required code plus headers when you select for example IO ports,

Bob, I recently received some of those 0805 boards and have those available now. Same price. Glenn, Did the board I sent you ever arrive or did the USPS Troll at the Gate throw it in the trash since

I am using the free MPLAB XC8 compiler from microchip. I am not familiar with the MCC tool.? Can you tell me where you got it from?? Is it MikroC? Also, I'm still working on the DEBUG mode.? I am

I thought I posted 2 xml files from the nbproject folder.? I'll go double check, and see if I missed anything. Thanks for checking this.

Hi Glenn, Exciting news indeed! Is it possible to get one here in the US? Let me know. On another note; The board you sent me does not have the MCU. It looks like one was installed but either taken

As someone mentioned, it sure looks like the kits are identical, at least for the most part.? So I have a feeling that 9 out of 10 sellers probably have no idea what they're selling - they buy in

David, I did touch up all of the relay solder joints even though I could not see an obvious problem with them. I noticed that the leads of the relays do not really protrude from the bottom of the

:0:: error: (1347) can't find 0x2 words (0x2 withtotal) for psect "stringtext29" in class "STRCODE" (largest unused contiguous range 0x1) This is the compiler error. Sorry I did not include this in

I have? downloaded the WA1RCT code (Thanks David!!!). Unfortunately I cannot compile it and I expect something is missing. I have used the MCC tool to create the environment and with this the

Hi Dave, I couldn't find a way to open the project in MPLAB X IDE, Should there be some project related xml files in the nbproject folder? Also, couldn't find im?lementation for the softI2C or isn't

+1 what Onno said. I have an AT1000 that I successfully upgraded to 3.2. Just make sure you copy out your eeprom values before doing the upgrade. regards Tim -- VK2XAX : QF56if : ITU59 : CQ30 : BMARC

Hi, Scott Other people report about up to 3 not soldered properly relays in one Chinese atu-10. The problem is in oxidized nodes of relays, that is not simple cold soldering. I will improve the test

Many people in this thread have gotten a defective ATU-10 from Chinese vendors on eBay/AliExpres/....? These have quality components but bad manufacturing (cold solder joints etc.). I too got one of

Hi Finally have this faulty ATU-100 repaired... and what a mess it was! The following is offered in the hope it will save others some time and energy. The original fault symptoms which seemed to

I have not done the diff yet on the firmware but I highly doubt any difference is there. Hardware design is the same and the software supports high power settings. The eeprom values will be different