开云体育

I understand your frustration.? Went through the same myself.? Got everything working in the end and before I forgot what I did I did a post on the forum with the steps I took. Post number is

Hi Mike, Most of the ATU-100's are shipped with the protection bits set, so you can’t read or write to the EEPROM. If you want to modify the EEPROM values, you will need to reprogram the PIC. There

I just built an ATU-100 and it powered up fine.? I wound the transformer for 5:1 to use it for QRP. I am struggling to edit the EEPROM settings with a pickit2.? I am using pickitminus software (the

Hello.? I just built my ATU-100 kit, and it appeared to work when I powered it up, but I want to use it for QRP (I wound the binocular transformer at 5:1). I have a pickit2.? The only software that

There are no settings to change the color.

so your saying the led was put in , in reverse, and not a setting.

Hi. You can rotate the LED to reverse the colors.

It seems that my led that indicates the charging status is reversed . It seems to be green when charging and red when complete. I was testing out the tuner after changing the tuning threshold, only

0.5 :-)

The difference would be the ".5" part :) [email protected]> wrote:

What is the difference between the Pickit 3 and Pickit 3,5? Mike N2MS

finally received my Pickit 3.5 programmer, got it loaded and after some playing around I got the software running,I needed to set the VDD Pickit 3 to 3 for it to read the firmware, I needed to solder

The proper connection process starts at about the 2:10 point in this video. https://youtu.be/dPys_-_wPcQ?feature=shared Al, K2ZN wrote:

The connection to the Oled isn't the issue, it's the header for the Oled connector, that is in the way. Does the Pickit require all 5 wires? If so I will need to try and get something into the little

Hi Steve, For the Pickit connection to the ATU, you first need to unplug the 4 wire connector to the Oled. The Pickit requires a 5 wire cable. For the Tandem Match toroids I’ve used the adviced

Maybe you can find some useful pdf’s here: https://www.ur4unr.com/2021/10/15/atu-1-5kw-n7ddc-mode-by-eu2av/ I’ve assembled one purchased from AliExpress. It came with a short description. Both

I have received my Pickit 3.5, I have the programming software installed which I believe is working but connecting to the board of the tuner there is a 4 pin terminal block that is covering the MCLR

I just joined this group and plan on purchasing an ATU-1000 version. Are there turns winding included in the instructions when the? purchase is a? kit? Thanks Alex

Sorry Stig, First thing in the morning and I was not thinking. Yes, that will work to confirm the firmware file loaded. I'll be trying that today. 73 - Dave, N4ELM

Stig, How does that help with verifying that the new firmware file loaded? 73 - Dave, N4ELM