¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Re: ATU-15 vs atu-10
Fortunately mine doesn't have the power drain issue. it's been in my bag for a few months and still charged OK. Are these effectively the same units (except for the LEDs on the front panel)?
By David Cripps · #2839 ·
Re: ATU-15 vs atu-10
This switch,
By David Fainitski · #2838 ·
Re: ATU-15 vs atu-10
Hi, Stig I would check very carefully soldering of all the relays switches. There is a DIP switch to power relays, check the current with deleted DIP switch.
By David Fainitski · #2837 ·
Re: ATU-15 vs atu-10
Hi. I do also have one of the first ATU-15 from AloExpress, but it has a problem, with draining the battery, as the current draw doubles when going into std, or off mode. I did use a thermal camera,
By Stig Kristiansen · #2836 ·
Re: Hardware / software wish list
M0TGS Yes, there is everything you need. Tune c
By David Fainitski · #2835 ·
Re: pickit 3 that runs on win 1064 bit
my email is quadzillatech@gmail dot com for the folks trying to send it to me,thanks+73 Paul.
By Paul M3VUV · #2834 ·
Re: ATU-15 vs atu-10
That's Chinese 15 watt, unlike normal 10watt.
By David Fainitski · #2833 ·
Re: pickit 3 that runs on win 1064 bit
I just downloaded the software from post #1994, works perfectly on my Lenovo Thinkpad T420 with Win 10 Pro, 64bit, thank you Immo ,DL5KB. 73 Pete
By Peter - 2E0JHU · #2832 ·
ATU-15 vs atu-10
Hi i have recently purchased an ATU-10 unit from AliExpress but I was sent and ATU-15. this looks the same and had the 1.5sw which I¡¯ve updated to 1.6. All works ok. what is the difference between
By David Cripps · #2831 ·
Re: Hardware / software wish list
David, I was considering adding an ESP32 to the I2C for my ATU-10; sounds like you already did something very similar. I'm not a PIC person; would it be easy for me to port your changes to the ATU-10
By Peter Li · #2830 ·
Re: T match
Sorry to resurrect an old thread, but do I understand correctly that given the circuit shown, ATU-10 matches will generally be more low-pass in character?
By Peter Li · #2829 ·
Re: Hardware / software wish list
Where is the starting point? ?Is it the tune.c you recently posted?
By David M0TGC · #2828 ·
Re: pickit 3 that runs on win 1064 bit
By David Fainitski · #2827 ·
Re: no buttons working
Paul, you have to choose needed PIC manually in the menu
By David Fainitski · #2826 ·
Re: Hardware / software wish list
There are opensource ATU projects out there that already cover most of those requirements. Maybe its time to forget search algorithms altogether and move to using the like of the AD8302 gain phase
By Ian · #2825 ·
Re: Hardware / software wish list
People, the Atu 100 algorithm is out of date. Is somebody able to port the algorithm from ATU-10 ? I don't have a time and also I don't have needed hardware setup to test it.
By David Fainitski · #2824 ·
Re: pickit 3 that runs on win 1064 bit
http://kair.us/projects/pickitminus/
By larry36sat@... · #2823 ·
Re: no buttons working
well i have found my pickit3 and am haviing to use my win7pc as the pickit wont work on my win 10 pc,it says nothing detected,see screenshot,does that mean its dead,if so why did it happen?
By Paul M3VUV · #2822 ·
Re: pickit 3 that runs on win 1064 bit
I tried sending you a zip to the email address on your qrz entry but it bounced. David M0TGC
By David M0TGC · #2821 ·
Re: pickit 3 that runs on win 1064 bit
73 Immo ,DL5KB
By Immo, DL5KB · #2820 ·