开云体育

I can only throw this into the mix; the only time I ever saw stuck pixels on the display was when I used my Apple Mac worksation to update the firmware. I now use a Windows VM and I've never had a

I have a new ATU-10 that mostly works great, but the static pixels, those that aren't updated on each transmission, randomly turn on over a period of time. I considered RF in the box and made sure I

Is there a place in the .hex firmware file to change how long you need to hold the tune button in order to turn the ATU-10 on or off? I would like to be more like 1 sec vs. 3 sec. If not, can this be

Hi From the text I assume that it is an ATU bought from the Chinese, with a built-in internal battery. The noise may come from the battery charging unit. If you can, isolate that unit and feed it

Hi. Replace that 5 volt regulator or check what is wrong with it. That is the interferences source.

My ATU-100 has all of a sudden turned into a noise generator.? It's spewing noise across the entire 3 MHz. to 55 MHz. spectrum so far as I can see by looking at the waterfall on my IC705.? It's not

No period issue with 1.6, uploaded with German Win 10, originally from https://github.com/Dfinitski/ATU-10-10W-QRP-antenna-tuner/blob/main/Firmware/ATU-10_FW_16.zip 73 de Chris

Hi, Paul Ceramics type should be NP0 or X7R kind for ceramics capacitors or silver mica, 250 Volts or higher. The inductor should be with high Q on 30 MHz and does not have selfresonance in 0 - 30 MHz

the linked schematic doesent state the cap type,ie film or silver mica etc,any ideas what to use,ie type of caps?,cheers+73.

any idea what type of caps+ voltage rating?.

Click on the Product Schematic link at https://mfjenterprises.com/products/mfj-4117#product-manuals

i realy need a schematic to ork from ok,cheers+73

IN to Coax DC in, decoupled by 1n 10n 100n 100n, +ve through 12 turns 18swg copper on FT37-43,? decoupled by 1n, 10n 100n 100n, +ve through 6 turns 18swg copper on FT37-43, +ve to coax inner. RF in

i want to mount my atu 100 on my mast,has anyone a schematic for a schematic for a bias t good for 100watt tx power?

LDG sells a balanced feedline balun, coax to balanced line, goodfor (I think) 200 watts.Not terribly expensive either 73 de W5ALX Alex Netherton http://blueridgediscovery.org

just make and fit a 1-1 balun.

Hi all I have a question: beside the unbalanced (sma pl) connector is possible to add a unbalanced connector?

Hi. A reset feature is the bypass or not ?

Good day everyone, just asking if the bypass option is available on th ATU-10. I am not able to find an info on it. Thank you iv3bty

Yes but he was asking about 20x04 display 20 characters over 4 lines instead 16 charactes over 2 lines. Towards the end of that video it shows what I think is a 16 x 04 which works but only uses