开云体育

Hi Paul, Looking at the screen shot, is it showing the readback values or the values you tried to write? A point to note is that the /MCLR option on the main screen should not be selected. This

heres a pic of the picit3 screen,grab (not mine but an example) someone explain what is what,ie what are cells etc,thanks+73

this is what i managed to write to the pic but still no oled working.

i can only turn off all rotect after dlicking the check comunication on the tools menu,if i dont do that first the data and code protect are greyed out,after changing it reverts to all protect

Hi Paul, After disabling the code and data protect bits you need to write to the device. Import the reference github hex file. Turn off the protection settings in the tools tab. Enable Code Protect.

as an update, if i go into tools and look at code and data protect tabs they are greyed out,if i click check cominication i can then go and uncheck code and data protect,as soon as i try and read the

i am trying to program my atu-100,ir has the 16e 1938,in pickit3 it says in red all rotect so i cant write to it,how do i fix it so i can write too the pcb onboard pic with the pickit3

you don't have to flash the firmware. you need to adjust the eeprom settings. Setting of EEPROM-cells/ Werte in den EEPROM-Zellen 00 — I2C address setting cell of the connected display. The port

Well i flashed the above file but still no display (oled),see the fw i have read attached.,does it need altering for oled?.73

does the atu_100_fw_ext_32.zip work with the oled as is?,cheers+ 73.

and here you get the manual: https://github.com/Dfinitski/N7DDC-ATU-100-mini-and-extended-boards/tree/master/ATU_100_EXT_board/ATU_100_EXT_board_User_Manual 73, Immo

hi Paul, here the link to the explanation of the eeprom-cells: /g/ATU100/attachment/2277/0/EEPROM-Cells%20Content-de_eng.pdf and how to get the hexcode for version 3.2, look my post

have you a link to the said manual you mention,cheers+ 73

Hi Paul Feeder loss is the main parameter of certain cable you use. In decibels on 100 meters of length. In additional, one more thing.... Loss due to high

Hi, Paul You can order needed 3d printed parts using some printing services, it is not necessary to have your own 3d printer.

correction..... under the eeprom data screen NOT the program memory screen. and each line is 16 cells wide also in HEX

was trying to upload some files from the github repo to the files section on here,it goes ok but after selecting the file the add button does nothing,is the site broken?.

Where the number screen is - under the words Program Memory there is a list in grey background down the left side. this is the Cell Number starting at 0000 with eight cells across the screen in white

Paul M3VUV <nanovnauser@...> added folder */from github*

Hi all,i am looking to try my atu-100 with firstly an lcd then oled displays,see screenshot of it hooked up to the programer,can someone circle what i need to alter to do this as i am unshure what to