开云体育

Fortunately mine doesn't have the power drain issue. it's been in my bag for a few months and still charged OK.

Are these effectively the same units (except for the LEDs on the front panel)?

This switch,?

Hi, Stig
I would check very carefully soldering of all the relays switches.
There is a DIP switch to power relays, check the current with deleted DIP switch.

Hi.

I do also have one of the first ATU-15 from AloExpress, but it has a problem, with draining the battery, as the current draw doubles when going into std, or off mode.

I did use a thermal camera, to see what gets hut, and only the CPU gets hotter in this std or off mode, and i have tried all the different SW versions, with the same result, so there might be a HW problem ??

?

73 de OX3XO - Stig.

M0TGS
Yes, there is everything you need.
Tune c

my email is quadzillatech@gmail?dot com for the folks trying to send it to me,thanks+73 Paul.

I just downloaded the software from post #1994, works perfectly on my Lenovo Thinkpad T420 with Win 10 Pro, 64bit, thank you Immo ,DL5KB.

73
Pete

Hi
i have recently purchased an ATU-10 unit from AliExpress but I was sent and ATU-15.
this looks the same and had the 1.5sw which I’ve updated to 1.6. All works ok.

what is the difference between the 10 and 15? Have I lost out or is the 15 better/different?

thanks

David

David, I was considering adding an ESP32 to the I2C for my ATU-10; sounds like you already did something very similar. I'm not a PIC person; would it be easy for me to port your changes to the ATU-10 and get it compiled and uploaded?

Sorry to resurrect an old thread, but do I understand correctly that given the circuit shown, ATU-10 matches will generally be more low-pass in character?

Where is the starting point? ?Is it the tune.c you recently posted?

Paul, you have to choose needed PIC manually in the menu

There are opensource ATU projects out there that already cover most of those requirements. Maybe its time to forget search algorithms altogether and move to using the like of the AD8302 gain phase detector and calculate directly.? Its on my bench but along with too many other projects.

Ian
VK2AMA

People, the Atu 100 algorithm is out of date. Is somebody able to port the algorithm from ATU-10 ?
I don't have a time and also I don't have needed hardware setup to test it.

http://kair.us/projects/pickitminus/

well i have found my pickit3 and am haviing to use my win7pc as the pickit wont work on my win 10 pc,it says nothing detected,see screenshot,does that mean its dead,if so why did it happen?

I tried sending you a zip to the email address on your qrz entry but it bounced.?

David M0TGC

hi Paul, look to my post #1994. I appended a zip with complete software for picki3 also working on Win10/64bit

73 Immo ,DL5KB