开云体育

Hi Fabrizio, (resend to correct typo) Can you take some photos to illustrate your resolution method. I am interested to try on my ATU10 as well, since I got the same issue. 73 de VR2XLQ

Hi Fabrizio, Give you take some photos to illustrate your reslolution method. I am interested to try on my ATU10 as well, since I got the issue. 73 de VR2XLQ

Hi, ?I had the same issue on mine. It was solved by making sure that the wires connecting the LCD pass as far as possible from the PCB with the toroids, and putting a ferrite bead clip around them.

Happy that i could help Jo. Enjoy your ATU :) Hear you on the bands. Best 73s de Christian, DL5CV

Thanks Chris. The operation went well. ? 73. Jo - F5NFB

Hi Jo, You'll find the firmware updates in the GitHub repository in folder "Firmware". There's a zip file vor every Version containing the binary file that you need to put on the usb drive presented

Hello everyone. Thank you for accepting me into your group. I have an ATU-10 for use in QRP but I only use version 1.4. I saw on Github that the latest version was 1.6 and downloaded it. These are all

Hallo Immo, Meine Firmware ist 3.2. Ich glaube aber Joerg lag falsch. Es ging da eher um folgenden Punkt (original Text englisch manual): 33 — cell for setting of an addidional indication mode,

Hallo Joerg, Ich habe nach Immo's mail ( [email protected] ) auch ins Manual geschaut und folgendes ihm geschrieben: Hallo Immo, Meine Firmware ist 3.2. Ich glaube aber Joerg lag falsch. Es ging da

hi Roby, ich bin erstaunt über die Anzeige. Welche Software Version hast Du? (Ich habe die Beschreibung übersetzt und kann mich nicht an sowas erinnern) Vielleicht solltest Du updaten… 73, Immo

Hallo Jürg, Danke für die Info, Also nichts Besorgniserregendes (Kabelversuste), d.h. ginge nur runter mit dickerem Coaxkabel. War vorallem verwirrend da es auf dem Bildschirm steht ?fider loss“

Hello Roby, You can configure the loss of the feeder line (cable loss) from the ATU to the antenna. See the documentation of configuration cell 34: " 34 — cell for setting a feeder power loss ratio,

The fast test on my atu-100 ext kit gives me above mentioned message, as the tuner seems to work. I have a problem to understand what that means - is that good or not? Can anybody help me what I need

Thanks Russ I’ll have a look at those diodes and then, if I can, de-glue the connections to update/modify the firmware. Your reply is appreciated. Thx, Dan

Don - the tandem match diodes on Aliexpress units sometimes are not the correct BAT41 or 1N5711 diodes, causing incorrect readings. You could try changing cell 31 values until your tuner agrees with

Recently acquired new ATU-100 (AliExpress). ?All functions seem to work appropriately with the exception of the power output reading. ? Knowing the input watts is 50, the ATU will reads 60-70 watts

Hi. IDE is MikroC for PIC by Mikroe

Hi Marc, I think it is useful to be able to update the parameters without having to re-flash the device. Menus are okay, but they can become a bit of a pain if you have to navigate with say just one

Any thoughts on the menus or ability to change device parameters (cells) without flashing? Graphs are a nice to have, but not necessary right?

How do I "compile" the source code (by David Fainitski) into an .hex file for the ATU-10? In fact I have the impression the power and swr meters are off. I would anyway love customising the control