开云体育

Hi, Dave The power measured at the input and the value is correct when SWR close to 1.

Hi - I have a question about the displayed data - With the unit in "Test Mode", the display shows "SWR" and a power value - is this value the power measured at the input to the tuner, or the output

Thanks all! Didn't know that the v1.3 would work too. Good info! Did find a v1.2, so all set for now. 73 Mark AJ6CU

By the way, Mark 0603 parts will fit on my 0805 pads on V1.3x boards. Glenn

Mark You could resolve it by fitting a separate USB socket. eBay has for example a little PCB that has a USB-Micro socket on it. Then wire it in.??? I know that won't be super easy either but would

I have one. $5 including postage

Hi, Might have messed up my v1.2 board while trying to solder the USB-C socket. So I am looking for a plan b.? Since I have already bought all the smaller SMD components, prefer to stick with v1.2

They use the ground GND in common. <djcompton73@...>于2021年12月28日 周二09:32写道：

Hello! First of all - thanks, David, for this awesome project! My attempt is about bettering the ground at the RF-power part of the board. Originally it is too much cut-through, forcing more

https://m.youtube.com/watch?v=6am8usWHHjo https://m.youtube.com/watch?v=bcwcDPU5PLQ&t=52s <djcompton73@...>于2021年12月26日 周日22:17写道：

Thanks for responding and the explanation. I will start playing with it today. Gregg KD1MU

Perfect, thanks! That was just how I was going to install the caps. Can I ask, is that an assembly video you took screenhots from? If so, I would love to see the video! I would also appreciate seeing

陈海生 <hisonauto@...>于2021年12月26日 周日09:33写道：

<djcompton73@...>于2021年12月26日 周日09:20写道：

Hello all. I have my ATU-100 assembled and purchased an enclosure kit off of ebay for it. I am looking for a guide, hopefully pictoral, that will show me how to wire up the “tune”, “auto”, and

Yes, and to your last point:? ?The defines separate these changes. The WA1RCT define changes the pinouts, so just do NOT define that. THen leave the MPLAB define set, and you should be good to go.?

Hi Gregg, well, I clearly have not documented what I've done very well. I have created two #defines.? ?One is for the MPLAB compiler, and the second is for WA1RCT. I tried to put all the compiler

Hi Dave Thanks for doing this great work. I am excited to have something to test under MPLAB. Are all your changes under one #define? I am going to play with this at some point, but I want to test

That was it. I got display and it seam to work :o) Thank you for excellent work! Now I will start imagine what I want to do... memory per band or frequency which of course need a frequency reading

I guess I found my problem... The degine of WA1RCT was set by default. Will test again when I have some time.