开云体育

Hi, Glenn That is correct 3 pin connectors by my link. Here the link with BNC connectors https://a.aliexpress.com/_uIdh2h

Hi Glenn, In many cases, aliexpress or ebay merchants don’t even know the names, so the buyer has to decide what the merchant is actually selling. See for example: 6 pin socket, additional switch

Thanks Gyula, Unfortunately,? the BOM from David does not give the full part type of the connectors for those sourcing parts elsewhere.. *And* Davids direct link posted below,

Hello. Excerpt from the documentation: 00 -I2C address setting cell of the connected display. The port extension board for display 1602 made on the PCF8574AT chip has the address 7E, on the chip with

Hi Glenn, The type designation distinguishes the 3-pin and 4-pin connectors with a hyphen and an additional number. So there are 4-pole and there are also 3-pole PJ-311 and PJ342. See here:

David There's some potential 'confusion' here I think, as the IC-705 TUNER socket is a stereo type ie 3 contacts. The parts (socket) you have specified, *are both 4 way connectors*.?? Not sure why

I have two boards doing the same thing, both on slow test I am get 1.83uH instead of 8.53uH?? Capacitance is only 399pF instead of 1869pF? I am having a 2nd person go over one of the boards and we

Glenn, 1 to 1 connection. First ring is Ground, second is Start, third is Key.

Just put the tuner in auto,saves all the shit and cables etc

David. I mean the actual wiring connections.You have a 3.5mm socket on the atu and so does the IC705.? ??Is it a 1 to 1 wiring connect?? Ie tip to tip ang ring to ring?? One assumes so but best to

Hi Glenn. What are you meaning ? That is simple connection with 3.5mm Jack audio cable. Everything else works like AH-705 tuner, very simple, nothing interesting.

* David can you please add the connection details from the ATU-10 V1.2 to IC-705 to your GitHub glenn vk3pe

Hi people My video on YouTube, ATU-10 FW 1.2 works with IC-705 https://www.youtube.com/watch?v=oanICrrSyFE

Use a RF choke AT the ATU wrote:

Firmware 1.2 is available. 1 - Display memory feature for last SWR? added 2 - full automatic mode error solved.

Andy, Did you take the turns of both winding symmetrically? If not there will be an imbalance. There is also a hysteresis of the unit where it doesn't think it should tune I have not found a way to

Hi Folks, I am having a bit of bother with my ATU100 and wonder if someone can suggest a plan of action. Basically, it doesn't always tune. I can't see rhyme or reason to it. At first I thought it was

Dale, Check the github https://github.com/Dfinitski/ATU-10-10W-QRP-antenna-tuner The BOM is there with Digikey cat numbers. Some parts maybe on long lead times.? Not all at Digikey, as you will see,

Has anyone developed a BOM for Digikey?? I would appreciate a copy.? Thanks, Dale

Certainly did, *I ordered it. Thanks.* Glenn