|
Help needed setting up FTM-300 with APRSIS32
6
I am new to APRS and am trying to set up my FTM-300 so that it acts as an igate by feeding RF spots to ARRSIS and also so these are visible on aprs.fi My FTM-300 is configured as M0NMA-9 APRSIS is set up as M0NMA-10 I am testing spots using an FT2D (M0NMA-1) handheld, beaconing on 50mW, so its range is very limited to avoid being spotted by other igates. My FTM-300 is spotting M0NMA-1 as well as other traffic (mainly gateways like MB7UM and MB7VH). On the map display I can see M0NMA-10, 9 and 1 displayed on the screen and I see RF spots appearing on the scroller (with asterisk), but only M0NMA-1. Earlier spots of M0NMA-1 are going through a portable igate (a Venus X1C5 Plus). If I go on to APRS.fi, there is no sign of any spots, so I presume I need to do something to tell APRSIS to send the data it is seeing on to the internet? Where do I need to look? I can't see anything obvious in the manual or the menus. Thanks in advance Steve M0NMA
|
|
I use aprsisce pretty effectively as an igate (with limited gating of internet to RF for really local stations) but regularly new windows open and I find myself tracking maybe four or five stations from within europe that I have no prior knowledge of. Clearly I have toggled something on or edited a setting file I should not have? Any suggestions?
|
|
|
|
Already have Passcode?
2
I'm getting back into this after a long drought. But not sure if I have a passcode already. What would it be registered under? So you can check for it? Call? E-Mail Address? ETC. Joe WB9SBD
|
|
Passcose request
I already have, check your SPAM filter-- 73 de Steve Wilson KF6WAX, APRSISCE32, ADMIN/MODERATOR
|
|
|
|
APRSISCE/32 Passcode
2
Good morning, Been years but finally reinstalled APRSISCE/32 on this computer. I think my passcode is 9347 is this correct? If not can I obtain it again so that my station will show up. Thanks Jeffrey Dubin - N9MXT n9mxtham@...
|
|
Passcode Request
2
Please provide a passcode for William E. Diamond, callsign K6KRQ. -- Bill Diamond - K6KRQ Sacramento, CA
|
|
FTM-500 - Transmit from APRSIS32?
10
Been experimenting with APRSIS32 and my FTM-500, mixed results. Using the standard Yaesu cable SCU-56. - I can get data from the transceiver into APRSIS32. That is, when I configure and enable a port for the FTM-500, and run APRS on the radio, the APRS traffic is streamed into APRSIS32 - I cannot seem to transmit via RF from APRSIS32 to the FTM-500. The packets fall onto the floor as they say. - Similar when I connect the FTM-500 to my PC and use Processing (processing.org) to open up a serial connection - I can stream data in but not transmit. This doesn't surprise me too much as I suspect that the write handshake is not being handled correctly by the Processing Serial object, but I need to investigate this more. Also I assume but need to verify that the oddball way that the FTM-500 formats APRS messages is involved as well. Fairly sure that I'm formatting packets correctly from APRSIS32. Not looking for deep dive help necessarily, but curious if others know whether this is possible (and/or with earlier radios in the FTM family).
|
|
passcode request
2
?Please kindly provide passcode for APRSISCE/32 Thank you for your kind support. JN6JWN/Masashi Akiyama -- JN6JWN Masashi Akiyama
|
|
Passcode for APRSISCE/32
2
Christopher J. Vezeau W1CJV Need a passcode for APRSISCE/32 Thanks Sent from Proton Mail Android
|
|
Open Source
7
I have just opensourced the following software: APRSISCE (APRSIS32) APRSISMO APRSISDR My father's wishes were to do this upon his passing. He did not want any of his software to go commercial use, so I have added a GPL license to the source code. I have published on the APRS Foundation github which will ensure a very long life to the administration of the access to the source code. I plan to continue to act as keeper of the source code, so please reach out to me if you are wanting to work on the software, but it is here for you to work on in keeping with the license. https://github.com/APRSFoundation Paul (D) - KJ4DXK Lynn (D) - KJ4ERJ This software was brought to you by the letters L and P and the number 42.
|
|
Need a passcode for APRSISCE/32 Bob Bianca KN7E
3
Hello, I am Bob Bianca KN7E, may I have a passcode for APRSISCE/32. Thank You Email to request code is being rejected.
|
|
All: I recently recorded a time lapse video showing APRS-VARA activity on the 30-meter band (see below). The condensed video is only a few minutes long, but the actual recording time was approximately 8 hours. When I played it back, I noticed that stations would periodically disappear from the map over a certain amount of time and some would then reappear. My guess is that this is due to the time-out feature, which assumes a station is no longer active if no packets are heard over a given time period. It's obviously a useful feature, but I was wondering if the timeout can be modified for demonstration purposes i.e., video demos? Tony -K2MO Video Link: https://www.youtube.com/watch?v=NAoo3dpEqdI HF APRS Time Lapse Video (30 Meter Band) This time lapse video shows APRS activity on the 30M band using the VARA modem. www.youtube.com
|
|
Password request
2
Please update the pass code for kf7voj. Thank you for your time and effort in this matter. MrDBThomas, sui juris "Veritas numquam perit?”
|
|
|
|
|
|
Passcode Requests
3
Just recently a number of requests for passcodes have been received via this groups message system. Please do not use the above method, instead use the link as provided below, http://aprsisce.wikidot.com/doc:passcode When asking for a passcode do provide your name and callsign as shown on your license! 73 de Steve Wilson KF6WAX, APRSISCE, ADMIN
|
|
Passcode for KJ&HNW / Audrey Moran APRSISCE/32
3
Requesting Passcode for KJ7HNW / Audrey Moran. She is my daughter which she lives in Washington State. I am trying to help get set up for APRS. Thanks David Morgan / KC7KRB
|
|
Passcode Request
2
EA4HRV CRISTI ALBERTO SEBASTIAN you need a passcode for APRSISCE/32 73
|
Image Name
Sat 8:39am
Sat 8:39am