开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. APRSISCE
  2. Topics

Trying to get APRSIS32 to work with a Microsat WX3in1 Plus 2.0 on the RF side.

 

Good Morning,
?
I'm testing a WX3in1 running as an APRS I-Gate W3TAC-1 with digipeater-off. Everything appears to work on the TCPIP/internet/APRS.FI side.? My half wave antenna is only 18 inches off the ground so I don't expect to get out (10 watts) very well on xmit but it works well enough for testing.?
?
The status box on upper left side of APRSIS32 flashes between "APRIS-OK" and "WX3in1 KISS-OK" but about every 6 seconds something quickly flashes so fast in the background I can't read it but I think it says something like WX3in1 KISS OPN CMD? With the scroller set to RF only no stations show up in the left column but plenty of APRS-IS stations show up on the map from the internet side.?
?
The WX3in1 is in the basement feeding the router upstairs via Cat-5 cable. Been working this for weeks and starting to think the WX3in1 is not compatible with APRSIS32. Anybody get their WX3in1 working with APRSIS32??
?
Tony
Lynn Deffenbaugh
 

开云体育

What port type are you using in APRSIS32 for the WX3in1??? Hopefully it's Simply(KISS) and the WX3in1 is locked in KISS mode?

You can also bring up the Port(<YourPortName>) trace log and enable it to see what might be going on.

If you have a Quiet Time enabled on the port, make sure it is longer than the longest time you'd expect between received packets in your local area.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

PS.? What callsign-SSID do you have assigned to the APRSIS32 instance and the WX3in1?? Hopefully they are each unique.

On 10/7/2024 11:11 PM, Tony/W3TAC via groups.io wrote:

Good Morning,
?
I'm testing a WX3in1 running as an APRS I-Gate W3TAC-1 with digipeater-off. Everything appears to work on the TCPIP/internet/APRS.FI side.? My half wave antenna is only 18 inches off the ground so I don't expect to get out (10 watts) very well on xmit but it works well enough for testing.?
?
The status box on upper left side of APRSIS32 flashes between "APRIS-OK" and "WX3in1 KISS-OK" but about every 6 seconds something quickly flashes so fast in the background I can't read it but I think it says something like WX3in1 KISS OPN CMD? With the scroller set to RF only no stations show up in the left column but plenty of APRS-IS stations show up on the map from the internet side.?
?
The WX3in1 is in the basement feeding the router upstairs via Cat-5 cable. Been working this for weeks and starting to think the WX3in1 is not compatible with APRSIS32. Anybody get their WX3in1 working with APRSIS32??
?
Tony

1 - 2 of 2