开云体育

I have used a few different Bluetooth modules connected to the radio serial interface. I've connected HC05 and HC08 as well as the much older Roving Network RN41 and RN42 boards. My Byonics MTT4B

APRSIS32 does not support cross-port transmissions.? If you get really creative, you can accomplish this with 2 instances, but I wouldn't call it a digipeater, but a cross-band packet repeater. Lynn

Yes, APRSIS32 supports SPP Bluetooth connections to TNCs.?? You have to pair the Bluetooth SPP device using Windows itself, but after that it should show up in the Bluetooth device selection

I would like to use digipeater using two ports vara and kiss. How would I have to configure the xml file so that rf 2m traffic goes out to rf 10m vara and vice versa? [image: Mailsuite] Enviado con

What radio are you trying to connect to? Does your windows machine have BT? Does the Radio? I believe that Lynn had it working with a D710AG at one point with a bluetooth dongle but I haven't had a

Is it possible to use aprsis32 with bluetooth, I have only found aprsdroid but on android nothing on windows?

There is a new Development release that delivers improvements in the creation and display of APRS Bulletins.?? These are in the Messages / Bulletins menu. Messages / Bulletins / View is now Messages

Thanks you!

I concure that is correct Adam [email protected]> wrote:

IIRC, just right click on a Frequency Monitor window and disable it from the popup.?? Or just uncheck Enables / Frequency Monitor once a window is actually showing. Lynn (D) - KJ4ERJ - Author of

I enabled frequency monitor on the stabile 2020 version of APRSIS32 and can't turn it off!! Advise needed, please help. Hank/ke0cu

Les, You can make those changes remotely over the air if you have your TNC set up properly. I can walk you through it if you like. Contact me directly if you have any questions. James VE6SRV

I appreciate everyone's input, and as soon as the snow drifts have melted at the site, and I can drive up to the mountain I'll make the changes to eliminate the decode errors. Les Robison? N7GWT /

I like to think of myself as an armchair psychologist dealing deeply in the realm of associations... If someone was pinned down and or mentally at least partially incapacitated. It could be assumed

From: http://www.aprs.org/localinfo.html *BTEXT ;FFF.FFxyz*111111zDDMM.hhN/DDDMM.hhWrTnnn RXXm NETxxxxxx MTGxxxxx .........BTEXT ;FFF.FFxyz*111111zDDMM.hhN/DDDMM.hhWrTnnn oXXX NETxxxxxx MTGxxxxx Rxxm

That would be a corrupted packet coming from this source: https://aprs.fi/?c=raw&call=RUTH 2024-05-23 10:05:54 MDT: RUTH <https://aprs.fi/?c=raw&limit=&call=RUTH> packet format] 2024-05-23 10:12:54

Why would 505 represent an emergency? Looks more like a corrupted object packet that is trying to say ??5 degrees 05.39 minutes west for a repeater whose tone is 114.8 and operates under the callsign

I believe the digirig is fundamentally just a soundcard interface to the radio.?? APRSIS32 doesn't do any audio processing directly, but expects to talk to TNC, be it hardware, software, or

The log for the digirig is showing a connection error. I feel certain i have not set things up correctly.? Any idea what the correct setting would be? I am using the boafeng for testing only. Once i