开云体育

If you are running 2 instances ... When running 2 instance of APRSIS32, you MUST make sure there are 2 XML files (one for each instance).? In order to do that, you must have 2 "working directories

Burt, What you are telling us is that you have two instances of APRSISCE/32 running with different configurations. Your screen sizes are different causing different layouts to be used, and it sounds

Thanks Ben for the info. Stretching the screen worked for the desktop in getting the scroller enlarged. However, clicking on the left and right arrors did nothing for getting the correct screen on the

Thanks Ben for the info. Stretching the screen worked for the desktop in getting the scroller enlarged. However, clicking on the left and right arrors did nothing for getting the correct screen on the

Stretch the screen horizontally and at some point the scroller will become full height. Pess the right arrow button repeatedly and the map details will get darker. At each setting you get one with

I have a laptop and desktop sitting side by side both running APRSISCE.? Both are configured the same. You would think both computers would show the same.? NO. Laptop has a white screen with a full

I think that is it, but it isn't clear what these do. I'm guessing Percent (save?) Size (save?) Zoom (save?) And I don't have a clue what Zoom None does. I tried looking in the website, but was

I think it's the check options under the Preferred menu on a MultiTrack window? And if you close a MultiTrack that is following a specific station, and the window is not maximized, the current

OK, I forgot, but I successfully changed it without knowing... How do I set Multi-track screen size & zoom settings so they are recalled when I start another Multi-track? I know it's easy, but I

The first one you did may not have been Flashing but had another notification-type Mic-E status.? You'll notice that some status do "New Flash" where others may only do "New". They don't time out,

Ok, it's called "Ignore Mic-E Status".? Chalk it up to bad memory. Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

Lynn, I did get a subsequent pop up that I caught while it was flashing and it did have that option so I clicked Stop Flashing. I suspect they time out after some period of time. I will monitor

I don’t see an option for “Stop Flashing” When I click on the callsign in the Follow Window, MultiTrack and Follow are checked and the only applicable?? option is “Ignore Mic-E Status” 73,

Thanks Lynn. Made the changes and fingers crossed. Again thanks Brian

Interesting/Funny story regarding Priority msgs. When I first setup APRS on my Yaesu FT5D I was using priority status during the configuration testing. Finished and put it away. About an hour later

If you click on the station that is using Priority, you should see an option to "Stop Flashing".?? Once you do that, you will be asked if you want to permanently ignore the status from that

Thank you Lynn, Yes I had seen previously the Mic-E Notifications for Priority was checked so I expected the messages but didn’t realize the Follow screen was triggered from that as well. It is

In that case, look at Configure / Mic-E Notifications / Priority.?? I'm guessing that station is transmitting Priority and you have it enabled to bring up a New MultiTrack when received (which is

Lynn, I have similar issue but not for location ME, but for one specific callsign. I get a Follow screen on his callsign and I get messages that he transmitted Priority status messages. I have

Check Screen / Labels / Nicknames / ME and make sure you didn't check any of the MultiTrack (New Active Always) checkboxes. Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32