开云体育

Wooo Hooo!? It's now seemingly working as it has been.? I had my receive amp on the Tiny Traker 4 at 47.? Sure I hadn't changed anything but it wasn't receiving what it should have been so I turned

The Time in the upper left corner is actually the Transmit Pressure.?? You can read about it at: http://aprsisce.wikidot.com/doc:screen-features The thin colored bars at the bottom of that pane are

Yes, the upper left corner shows the time until your next beacon. Lynn was answering the other portion, but I didn't see a response to that part of your post. ------- Robert Giuliano KB8RCO

Ok, I just double-checked the source and the timestamp in the ?APRSS response is actually the timestamp that the port entered the current state.?? I now remember doing this so that you can see if

Send yourself a ?aprss and see what time is shown in that response.?? I just did it and it shows 04-30 07:52:19 and my local time is 10:45:xx, so not even the minutes is correct.?? Unless, of

The times do not seem to match my PC system clock time which is accurate from a utility which keeps it synced to an accurate time source.

See the screen print.? Can anyone tell me where the time in the upper left-hand corner comes from?? It appears to be counting down.? Is that the time to the next beacon transmission? How about the

Yep, you are correct, only TX pot. I was working from memory. And your procedure is much the same as mine. Ben Miller, PE retired KD9BBB 708-431-7875 bmilleng@... [email protected]> wrote:

Radio volume is for Rx.? The TT4 pot is for TX. The RXAMP and Volume Control do the same thing - but it is ALWAYS better to find a fixed output from the radio.? Many radios (well dual bands anyway)

On the receive level, the TinyTrak pot and the radio volume do the same thing. I generally fix one at a typical level, and then just use the other one to fine tune. Otherwise, they interact and you

Thanks so much for the detailed analysis.? Not sure what to think about the time setting.? Time on the PC seems right.? I recall I have a utillity to keep it set via atomic clock.? Not sure of the

Thanks Lynn. Appreciate the help!!

Those look correct.?? Based on the log captures and aprs.fi's raw packet view, it definitely appears that you are having intermittent RF reception (or at least, getting the packets into APRSIS32)

Here are the two screen shots requested!

My original answer, the first one in this subject thread: Check Screen / Labels / Nicknames / ME and make sure you didn't check any of the MultiTrack (New Active Always) checkboxes. Lynn (D) - KJ4ERJ

For that you're going to have to get really creative with your manually-specified filters.?? The NWS APRS information is at: https://www.aprs-is.net/WX/ And I think you're going to need to know the

Not everyone uses the groups.io web-view threaded reader (or whatever you use that seems to provide a threaded view).?? If you want an answer to a question, please include it in your request. We

I've attached my APRS monitor logs for your station from both RF reports and -IS gated packet captures for the 20s of April.?? Your AB9NN-48 IS IGating some packets, but on the RF side, it is very

Can you screen capture the port settings of your RF port and your APRS-IS port??? There are checkboxes in those that affect IGate operation.?? You can also view and enable the various IGate(*)

I’m still trying to figure out my original problem. I’ve lost track since other people have asked questions about their “problems “ If anyone knows the answer to my question… the first one