Glen,
?
Perhaps you have already figured out a solution, but here is mine. I configured my IGate filter to only transmit the multiline objects instead of the NWS message-formatted warnings (which don't contain any human text, only county and zone FIPS codes). The multiline objects are recognizable (at least on all my Kenwood radios that I tested) to any graphical APRS interface. The message-formatted warnings only highlight a county or zone on an interface configured to show those county/zone warnings. It also cuts down dupes since the messages are formatted as NWS-wrn and NWS_wrn. Not sure why.?
?
I would set mine up as follows to eliminate the flood warnings. The IGate filter is :
b/AKQ* +m/40 -o/AKQFF*
My NWS office is AKQ (Wakefield, VA). Using a radius filter passes only objects with a defined location to eliminate the message format warnings. Your mileage (err....kilometers) may vary. The negative o filters out flash flood warnings and statements.
