Re: Documentation or help with setting up bpq32 and aprsis32 using same radio and computer soundcard
|
OK I have some BPQ32 config information was sent to me.
See I don't have knowledge if I need special equipment to run kiss as in a separate tnc or if I'm just running in kiss mode.
Yes bpq has the ability to run in kiss if I create a kiss port. Which I already have 4 kiss ports created for future development.
I'm going to continue to research and see if anyone has previous experience.?
73 Mark K7OI?
It's been years since I ran BPQ. You need to modify your BPQ32.cfg file as John Wiseman has info about running APRS.?
73 Don Poaps
New Westminster, BC
VA7DGP DATA VA7QU ? VOICE Winlink:?va7dgp@...
Subject://wl2k ? ? ? ? ?
ALLSTAR ?530780
Hamshack Hotline5971
Mid-Island Phone Mesh 2210 2232
? ? ? ? ? ? ? ? ? ?
On Wed, May 1, 2024 at 12:46?PM Lynn Deffenbaugh via <kj4erj= [email protected]> wrote:
I'm not familiar with bpq32, but if it offers a KISS-over-TCP
port, the connection would be trivial.? But before we dive into
that, I'll see if anyone has actually made the connection already
between bpq32 and APRSIS32.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 5/1/2024 2:16 PM, K7OI-Mark wrote:
Hello
I have an instance of bpq32 and winlink rms running on my computer
with a radio and signalink. Been running very well for nearly
1year.
I have aprs running in bpq32 shows up as BBS.
I have aprsis32 that works on another computer on rf and igate.
But no extra radio and signalink.
Would it be possible to add aprsis32 to my bpq32 running full time
as rf/igate?
|
