The spot where it says "Delay Connect" is where it shows the current status of the APRS-IS connection. When all is working well, it should say "APRS OK". "Delay Connect" means that APRSISCE has attempted to connect and failed and is now in a holding pattern before attempting the next connection.
Can you verify that you have a good data connection using Internet Explorer to your favorite web site first? If IE can't bring up a page, then APRSISCE most likely can't establish a connection either.
In order to diagnose this further, I could use a copy of your .XML configuration file and a .LOG of the operation of APRSISCE. To get these files, follow the steps below:
1) Turn on Debug Logging via Menu/Enables/Debug Logging
2) Exit APRSISCE
3) Restart APRSISCE (This captures the startup debug)
4) Wait for the "Delay Connect" to appear.
5) Turn off Debug Logging the same way it was turned on
6) Exit APRSISCE
You should have two files in My Documents which are also synch'd to your desktop if you sync your phone. They will be APRSISCE.XML (the configuration file) and APRSISCE.LOG (the debug log). It is important to make sure these files synchronized after APRSISCE was closed or they won't have the latest data.
E-mail the files direct to KJ4ERJ@... please. I'll check into the configuration and the debug trace to see if I can figure out what's happening.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile
jamesmhz wrote:
toggle quoted message
Show quoted text
Hi all,
Firstly, thanks for such a great little program on the wm6 phone, loving it.
I'm just having one thing confusing me though... forgive me it has been mentioned before but I have searched and couldn't find any mention.
On my screen it comes up with "DELAYED CONNECT" at the top, I press transmit but don't see my call sign pop up on the live feed on the web, just wondering what could be the issue here, I'm most definate it's my side, always is haha
Any assistance would be of great help. Thanks
Sean Brad Inggs
ZR5BBL
