Newbie

#14

开云体育

I’ve just gotten a pair of 109 lathes, both in good condition

I need feedback on the largest jaw chuck that will fit and the craftsman’s model numbers that apply. ?

A 6” chuck just seems too big?

Mark Harris Berman, A.I.A., P.P.

Registered Architect & Professional Planner

Principal

?

. Please?forgive any misspelling.

Craftsman 109 lathe gear

#13

Thanks to the person who responded to my part number inquiry for the spindle end gear I was able to purchase one on Ebay....?

Atlas lathe spindle gear

#12

Thanks so much for the part number !

Re: I am working on a Craftsman 109 metal lathe 21270. I am wondering if anyone knows what the gear mounted on the back of the spindle is called or the part number. My lathe has a damaged gear ( this would be the gear needing removal

#11

Gary

You are correct you did not send that message.? HOWEVER..?? :)? The OTHER Gary did...? :)

Its OK? We all have those moments...?? :)

--
Chris (CB)
Group Owner

Re: I am working on a Craftsman 109 metal lathe 21270. I am wondering if anyone knows what the gear mounted on the back of the spindle is called or the part number. My lathe has a damaged gear ( this would be the gear needing removal

#10

I think you have the wrong guy, I didn't send that message. I haven't sent a message to this group in years, if ever!

Gary

Show quoted text

On Sun, Apr 28, 2019 at 11:26 PM Robert Downs via Groups.Io <wa5cab=[email protected]> wrote:

Gary,

First, in the future please DO NOT put your entire message in the message
Subject area.? Not only does this limit the length of your message to 255
characters, but it makes it quite troublesome for anyone to read what little
you can write without first hitting the REPLY button.? ? So limit your
Subject to no more than 40 to 60 characters.

Now, the part number of the gear you are looking for is A-3221, and the
description from the parts list is Spindle Gear.? The only thing that I can
tell you about that gear is that it is probably a 32T gear.? I do not have
an AA lathe to look at, so I can't tell you what the ID details are.? I
would guess that there is a good chance of Boston or some other gear
manufacturer making a gear that you can modify to work.? But you will need
to know the Diametral Pitch (DP) and the Pressure Angle (PA) before you
start looking through a catalog.

If you asked any other question, I cannot read it because of where you put
your message.

Robert Downs
Moderator

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of gary bugaiski
Sent: Sunday, April 28, 2019 12:26
To: [email protected]
Subject: [AA-109-Lathe-Group] I am working on a Craftsman 109 metal lathe
21270. I am wondering if anyone knows what the gear mounted on the back of
the spindle is called or the part number. My lathe has a damaged gear ( this
would be the gear needing removal to c

Re: I am working on a Craftsman 109 metal lathe 21270. I am wondering if anyone knows what the gear mounted on the back of the spindle is called or the part number. My lathe has a damaged gear ( this would be the gear needing removal

#9

Gary,

First, in the future please DO NOT put your entire message in the message
Subject area.  Not only does this limit the length of your message to 255
characters, but it makes it quite troublesome for anyone to read what little
you can write without first hitting the REPLY button.    So limit your
Subject to no more than 40 to 60 characters.

Now, the part number of the gear you are looking for is A-3221, and the
description from the parts list is Spindle Gear.  The only thing that I can
tell you about that gear is that it is probably a 32T gear.  I do not have
an AA lathe to look at, so I can't tell you what the ID details are.  I
would guess that there is a good chance of Boston or some other gear
manufacturer making a gear that you can modify to work.  But you will need
to know the Diametral Pitch (DP) and the Pressure Angle (PA) before you
start looking through a catalog.

If you asked any other question, I cannot read it because of where you put
your message.

Robert Downs
Moderator

Show quoted text

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of gary bugaiski
Sent: Sunday, April 28, 2019 12:26
To: [email protected]
Subject: [AA-109-Lathe-Group] I am working on a Craftsman 109 metal lathe
21270. I am wondering if anyone knows what the gear mounted on the back of
the spindle is called or the part number. My lathe has a damaged gear ( this
would be the gear needing removal to c

I am working on a Craftsman 109 metal lathe 21270. I am wondering if anyone knows what the gear mounted on the back of the spindle is called or the part number. My lathe has a damaged gear ( this would be the gear needing removal to change drive belts ).....Gary in Michigan

#8

Re: Welcome Group Members

#7

Both yahoo ang groups are available to post.? Ready to take on any 109 or workshop related topics. ?

I don’t think the 109 parts source is available any longer.? So used or eBay. ? If you have access to a second lathe making a spindle for this level of lathe is not difficult.? It’s good basic machining practice.? And you can make it whatever you want. ?:)

Chris

Show quoted text

On Sat, Mar 30, 2019 at 7:16 PM <ams3006@...> wrote:

Is the Yahoo group still active?

Any idea where to 109 parts?

Any one have any projects they are working on?

I bent my spindle, so trying to decide if I should try to fab one up or buy the one on Ebay.

Alex

--

Chris (CB)

--
Chris (CB)

Re: Welcome Group Members

#6

Is the Yahoo group still active?

Any idea where to 109 parts?

Any one have any projects they are working on?

I bent my spindle, so trying to decide if I should try to fab one up or buy the one on Ebay.

Alex

Re: 109 Lathe For Sale

#5

I already have one, but the price seems reasonable (assuming everything is in good order).

Good Luck

Alex

109 Lathe For Sale

#4

For anyone interested, I have a 109 for sale ...

Very clean, all original parts (color red) ... includes

all set up and ready for use.

-- a complete set of change gears

-- a 4 jaw chuck, a 3 jaw chuck, a lathe dog

-- motor included,manual and a few other items

Pics can be made available. Checking interest at this point

Asking price $400 or Best Offer.

Contact Jim 630-400-1649

Elgin, Illinois

Some online resources

#3

Here is a link to some online machining information. ?Quite a lot of information. ?Ready to read online or download to archive.

If you back up 1 level = parent directory. ?There is more information in several fields such as construction and farming...

--
Chris (CB)

Welcome Group Members

#1

Welcome to the groups.io version of this group.
Note at this time I am NOT Moving the AA_109_Lathe_Users_Group? from Yahoo.

I will wait to see how much activity this group receives and how well Groups.io handles things.
I do not like the method Groups.io or more specifically owners of a groups.io? groups simply decide to move everyone whether they want to or not.

As will all my groups...
Everyone is welcome.
Topics are only moderated for spam.?
No politics or religion.

So lets see where this group decides to go...?? :)