2022 Aliner Ranger 10 dual bunk model.
I noticed daylight between the two pieces of the roof where they meet at the peak.
The sidewalls raise up and lock in without malfunction - no scraping, no gapping as far as I can see, they just fit into place fine.
But from about 3-4 inches in from each peak corner, there's an apparent curvature to the peak edges of one or the other or both roof pieces. What causes this and how can I correct it?
The weather stripping appears undamaged, and the "daylight" that's visible appears filtered through something white/pale, which I assume is some kind of overhang/rain shield? But I'm concerned the peak edge is no longer watertight.
Thanks!
