|
I forgot rotary table.
If rotary table goes a mill it is OT.
But if goes Mini lathe it is $&#^$
I guess it depends on if you interested read a about putting on a mini lathe if on topic or off.
?
If do not like what they wrote then? write moderators and say OFF TOPIC and ask to have it delete post so no has anything thing to read.??
?
The bottom for group to be interesting is have something to read about and better to comment on too.
?
In November of 2023 I finally purchased a mini after reading about mini lathes since 2005.
The resoan thinking a mini lathe in 2005 changed by time purchased.? I chose to write about here and gave everyone here some read and write about.?
?
No one goes out buys a lathe every month. My first was a garulatoin present it only down payment on a $10,000 today same lathe cost $80,000 had for over 30 years. My next had for 20 years. The point is most do not go out and buy new lathe very often. So hard for very here to say a lot? .?
So we all here need more than jest the mini lathes to talk about or this would a very slow group
?
Dave?
?
On Fri, Jan 24, 2025 at 01:10 AM, Tony Smith wrote:
Rotary table is fine.? Way better than whatever this (or your lack of understanding of how motor temperature ratings work).
?
Tony
?
?
?
What is next thd chuck on the mini lathe is ot
On Thu, Jan 23, 2025 at 03:22 PM, Tony Smith wrote:
All that blah blah blah, and you still didn’t flag this thread as being off topic.
?
Two keystrokes is still two too many for you, I guess.
?
Tony
?
(Seriously, no-one cares, not even you.)
?
?
The first that only want to see mini lathes only. I seen on some? groups it has to what title is only.
Second group?arsed or not wanting to make the effort
to add OT to help the first group.?
Now the owner and moderators are trying to keep group fun and interesting for all.
Then dealing with the first group and second group not helping.?
A owner and moderators have hard job at times. How mush? can you talk the subject.
Some think you only talk about a mini lathes and the drill chuck is off subject.??
So soon or later you will have to go little or more off for slow times?
Last year this had a long topic on bikes. It was a interesting topic to read I had nothing to say. The important part it made group interesting for slow time.
If look at a few OFF topic I have post here in Tilte I put OFF SUBJECT .?
I Like OT Simple hit two keys at beginning?
On Wed, Jan 22, 2025 at 04:55 PM, Tony Smith wrote:
Nobody cares so long as it’s not too stupid. ?The moderators will be tired of seeing this stupid crap shortly and tell us to knock it off.
?
Lists die because of no traffic or too much stupid crap.? And this thread has definitely hit the latter.
?
And you still can’t be arsed to add OT to the subject.
?
Tony
?
?
?
[Edited Message Follows]
[Reason: Sorry used html code and change ]
I this some type limit off topic it best for and some one complain and others will anything under sun.?
I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.?
- ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
Sorry forgot No html codes
On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote:
When people can’t be arsed to even use OT, they sure ain’t gunna use those either.
?
This thread is off topic, look at all the people who could be bothered to mark it OT.
?
Tony
?
?
?
?
May have few for one for not like OFF TOPIC.?
AH? ?for AROUND THE HOME?
For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
I guess if get to hot on the lathe,? mill or drill press it is off topic.?
After all what does a motor have to do with a mini lathe.?
?
FYI any motor hears can be a fire ?.? I have temperature gauge on my mini lathe. I posted here and call on topic.
?
Painting die ? could be a little dicey on or off subjects. But helps with wife on getting a mini lathe. Happy wife happy mini lathe.?
?
Dave?
?
?
On Fri, Jan 24, 2025 at 01:10 AM, Tony Smith wrote:
Rotary table is fine.? Way better than whatever this (or your lack of understanding of how motor temperature ratings work).
?
Tony
?
?
?
What is next thd chuck on the mini lathe is ot
On Thu, Jan 23, 2025 at 03:22 PM, Tony Smith wrote:
All that blah blah blah, and you still didn’t flag this thread as being off topic.
?
Two keystrokes is still two too many for you, I guess.
?
Tony
?
(Seriously, no-one cares, not even you.)
?
?
The first that only want to see mini lathes only. I seen on some? groups it has to what title is only.
Second group?arsed or not wanting to make the effort
to add OT to help the first group.?
Now the owner and moderators are trying to keep group fun and interesting for all.
Then dealing with the first group and second group not helping.?
A owner and moderators have hard job at times. How mush? can you talk the subject.
Some think you only talk about a mini lathes and the drill chuck is off subject.??
So soon or later you will have to go little or more off for slow times?
Last year this had a long topic on bikes. It was a interesting topic to read I had nothing to say. The important part it made group interesting for slow time.
If look at a few OFF topic I have post here in Tilte I put OFF SUBJECT .?
I Like OT Simple hit two keys at beginning?
On Wed, Jan 22, 2025 at 04:55 PM, Tony Smith wrote:
Nobody cares so long as it’s not too stupid. ?The moderators will be tired of seeing this stupid crap shortly and tell us to knock it off.
?
Lists die because of no traffic or too much stupid crap.? And this thread has definitely hit the latter.
?
And you still can’t be arsed to add OT to the subject.
?
Tony
?
?
?
[Edited Message Follows]
[Reason: Sorry used html code and change ]
I this some type limit off topic it best for and some one complain and others will anything under sun.?
I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.?
- ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
Sorry forgot No html codes
On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote:
When people can’t be arsed to even use OT, they sure ain’t gunna use those either.
?
This thread is off topic, look at all the people who could be bothered to mark it OT.
?
Tony
?
?
?
?
May have few for one for not like OFF TOPIC.?
AH? ?for AROUND THE HOME?
For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
Rotary table is fine.? Way better than whatever this (or your lack of understanding of how motor temperature ratings work). ? Tony ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of davesmith1800 via groups.io
Sent: Friday, 24 January 2025 6:54 pm
To: [email protected]
Subject: Re: [7x12MiniLathe] ANSWER TO GUIDE RULE? What is next thd chuck on the mini lathe is ot On Thu, Jan 23, 2025 at 03:22 PM, Tony Smith wrote: All that blah blah blah, and you still didn’t flag this thread as being off topic. ? Two keystrokes is still two too many for you, I guess. ? Tony ? (Seriously, no-one cares, not even you.) ? ? The first that only want to see mini lathes only. I seen on some? groups it has to what title is only. Second group?arsed or not wanting to make the effort to add OT to help the first group.? Now the owner and moderators are trying to keep group fun and interesting for all. Then dealing with the first group and second group not helping.? A owner and moderators have hard job at times. How mush? can you talk the subject. Some think you only talk about a mini lathes and the drill chuck is off subject.?? So soon or later you will have to go little or more off for slow times? Last year this had a long topic on bikes. It was a interesting topic to read I had nothing to say. The important part it made group interesting for slow time. If look at a few OFF topic I have post here in Tilte I put OFF SUBJECT .? I Like OT Simple hit two keys at beginning? On Wed, Jan 22, 2025 at 04:55 PM, Tony Smith wrote: Nobody cares so long as it’s not too stupid. ?The moderators will be tired of seeing this stupid crap shortly and tell us to knock it off. ? Lists die because of no traffic or too much stupid crap.? And this thread has definitely hit the latter. ? And you still can’t be arsed to add OT to the subject. ? Tony ? ? ? [Edited Message Follows]
[Reason: Sorry used html code and change ] I this some type limit off topic it best for and some one complain and others will anything under sun.? I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.? - ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
Sorry forgot No html codes On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote: When people can’t be arsed to even use OT, they sure ain’t gunna use those either. ? This thread is off topic, look at all the people who could be bothered to mark it OT. ? Tony ? ? ? ? May have few for one for not like OFF TOPIC.? AH? ?for AROUND THE HOME? For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
This too
What is next thd chuck on the mini lathe is ot
?
On Thu, Jan 23, 2025 at 03:22 PM, Tony Smith wrote:
All that blah blah blah, and you still didn’t flag this thread as being off topic.
?
Two keystrokes is still two too many for you, I guess.
?
Tony
?
(Seriously, no-one cares, not even you.)
?
?
The first that only want to see mini lathes only. I seen on some? groups it has to what title is only.
Second group?arsed or not wanting to make the effort
to add OT to help the first group.?
Now the owner and moderators are trying to keep group fun and interesting for all.
Then dealing with the first group and second group not helping.?
A owner and moderators have hard job at times. How mush? can you talk the subject.
Some think you only talk about a mini lathes and the drill chuck is off subject.??
So soon or later you will have to go little or more off for slow times?
Last year this had a long topic on bikes. It was a interesting topic to read I had nothing to say. The important part it made group interesting for slow time.
If look at a few OFF topic I have post here in Tilte I put OFF SUBJECT .?
I Like OT Simple hit two keys at beginning?
On Wed, Jan 22, 2025 at 04:55 PM, Tony Smith wrote:
Nobody cares so long as it’s not too stupid. ?The moderators will be tired of seeing this stupid crap shortly and tell us to knock it off.
?
Lists die because of no traffic or too much stupid crap.? And this thread has definitely hit the latter.
?
And you still can’t be arsed to add OT to the subject.
?
Tony
?
?
?
[Edited Message Follows]
[Reason: Sorry used html code and change ]
I this some type limit off topic it best for and some one complain and others will anything under sun.?
I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.?
- ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
Sorry forgot No html codes
On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote:
When people can’t be arsed to even use OT, they sure ain’t gunna use those either.
?
This thread is off topic, look at all the people who could be bothered to mark it OT.
?
Tony
?
?
?
?
May have few for one for not like OFF TOPIC.?
AH? ?for AROUND THE HOME?
For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
All that blah blah blah, and you still didn’t flag this thread as being off topic. ? Two keystrokes is still two too many for you, I guess. ? Tony ? (Seriously, no-one cares, not even you.) ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of davesmith1800 via groups.io
Sent: Thursday, 23 January 2025 4:05 pm
To: [email protected]
Subject: Re: [7x12MiniLathe] ANSWER TO GUIDE RULE? The first that only want to see mini lathes only. I seen on some? groups it has to what title is only. Second group?arsed or not wanting to make the effort to add OT to help the first group.? Now the owner and moderators are trying to keep group fun and interesting for all. Then dealing with the first group and second group not helping.? A owner and moderators have hard job at times. How mush? can you talk the subject. Some think you only talk about a mini lathes and the drill chuck is off subject.?? So soon or later you will have to go little or more off for slow times? Last year this had a long topic on bikes. It was a interesting topic to read I had nothing to say. The important part it made group interesting for slow time. If look at a few OFF topic I have post here in Tilte I put OFF SUBJECT .? I Like OT Simple hit two keys at beginning? On Wed, Jan 22, 2025 at 04:55 PM, Tony Smith wrote: Nobody cares so long as it’s not too stupid. ?The moderators will be tired of seeing this stupid crap shortly and tell us to knock it off. ? Lists die because of no traffic or too much stupid crap.? And this thread has definitely hit the latter. ? And you still can’t be arsed to add OT to the subject. ? Tony ? ? ? [Edited Message Follows]
[Reason: Sorry used html code and change ] I this some type limit off topic it best for and some one complain and others will anything under sun.? I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.? - ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
Sorry forgot No html codes On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote: When people can’t be arsed to even use OT, they sure ain’t gunna use those either. ? This thread is off topic, look at all the people who could be bothered to mark it OT. ? Tony ? ? ? ? May have few for one for not like OFF TOPIC.? AH? ?for AROUND THE HOME? For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
The first that only want to see mini lathes only. I seen on some? groups it has to what title is only.
?
Second group?arsed or not wanting to make the effort
to add OT to help the first group.?
?
Now the owner and moderators are trying to keep group fun and interesting for all.
Then dealing with the first group and second group not helping.?
?
A owner and moderators have hard job at times. How mush? can you talk the subject.
Some think you only talk about a mini lathes and the drill chuck is off subject.??
So soon or later you will have to go little or more off for slow times?
?
Last year this had a long topic on bikes. It was a interesting topic to read I had nothing to say. The important part it made group interesting for slow time.
?
If look at a few OFF topic I have post here in Tilte I put OFF SUBJECT .?
?
I Like OT Simple hit two keys at beginning?
?
?
?
On Wed, Jan 22, 2025 at 04:55 PM, Tony Smith wrote:
Nobody cares so long as it’s not too stupid. ?The moderators will be tired of seeing this stupid crap shortly and tell us to knock it off.
?
Lists die because of no traffic or too much stupid crap.? And this thread has definitely hit the latter.
?
And you still can’t be arsed to add OT to the subject.
?
Tony
?
?
?
[Edited Message Follows]
[Reason: Sorry used html code and change ]
I this some type limit off topic it best for and some one complain and others will anything under sun.?
I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.?
- ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
Sorry forgot No html codes
On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote:
When people can’t be arsed to even use OT, they sure ain’t gunna use those either.
?
This thread is off topic, look at all the people who could be bothered to mark it OT.
?
Tony
?
?
?
?
May have few for one for not like OFF TOPIC.?
AH? ?for AROUND THE HOME?
For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
Nobody cares so long as it’s not too stupid. ?The moderators will be tired of seeing this stupid crap shortly and tell us to knock it off. ? Lists die because of no traffic or too much stupid crap.? And this thread has definitely hit the latter. ? And you still can’t be arsed to add OT to the subject. ? Tony ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of davesmith1800 via groups.io
Sent: Thursday, 23 January 2025 11:10 am
To: [email protected]
Subject: Re: [7x12MiniLathe] ANSWER TO GUIDE RULE? [Edited Message Follows]
[Reason: Sorry used html code and change ] I this some type limit off topic it best for and some one complain and others will anything under sun.? I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.? - ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
Sorry forgot No html codes On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote: When people can’t be arsed to even use OT, they sure ain’t gunna use those either. ? This thread is off topic, look at all the people who could be bothered to mark it OT. ? Tony ? ? ? ? May have few for one for not like OFF TOPIC.? AH? ?for AROUND THE HOME? For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
I know right.
?
I this some type limit off topic it best for and some one complain and others will anything under sun.?
?
I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.?
?
- ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
No one has to OT
Simple?
?
Dave?
?
Sorry forgot No html codes
?
On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote:
When people can’t be arsed to even use OT, they sure ain’t gunna use those either.
?
This thread is off topic, look at all the people who could be bothered to mark it OT.
?
Tony
?
?
?
?
May have few for one for not like OFF TOPIC.?
AH? ?for AROUND THE HOME?
For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
When people can’t be arsed to even use OT, they sure ain’t gunna use those either. ? This thread is off topic, look at all the people who could be bothered to mark it OT. ? Tony ? ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of davesmith1800 via groups.io
Sent: Wednesday, 22 January 2025 7:04 pm
To: [email protected]
Subject: Re: [7x12MiniLathe] ANSWER TO GUIDE RULE? May have few for one for not like OFF TOPIC.? AH? ?for AROUND THE HOME? For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
May have few for one for not like OFF TOPIC.?
?
OT? ? for OFF TOPIC
AH? ?for AROUND THE HOME?
PR? ? for PROJECTS?
MM? For Mini Mill
?
For I am OK with or without tags. I enjoy read like good old fashione Magazines?
?
Dave?
|
I think the convention is to use "OT" for "Off Topic."? Don't need any periods.
Charles E. "Chuck" Kinzer
On Sunday, January 19, 2025 at 07:14:38 PM PST, davesmith1800 <davesmith1@...> wrote:
It a balance of on subject and off subject.? Off subject can keep a group a live in slow times.?
1) It more how far off subject.
2) I think the title should say OS or? O.S. for off subject.?
This any does read about off subject they can skip it.
3) The what is on subject only talk about mini lathes or mills or projects maybe even using the lathe for anything.??
?
It nice if could have two threads here one for on subject and one off subject.
?
Best opinion is in tilte say OS or? O.S.
?
Dave?
?
FYI
I ran across your Aloris milling Attachment on different site nice work?
?
On Sun, Jan 19, 2025 at 05:28 PM, OldToolmaker wrote:
Does it really matter if someone likes something. I think that is a personal opinion and not relevant to the group as a whole.
Dick
Attachments:
|
It a balance of on subject and off subject.? Off subject can keep a group a live in slow times.?
1) It more how far off subject.
2) I think the title should say OS or? O.S. for off subject.?
This any does read about off subject they can skip it.
3) The what is on subject only talk about mini lathes or mills or projects maybe even using the lathe for anything.??
?
It nice if could have two threads here one for on subject and one off subject.
?
Best opinion is in tilte say OS or? O.S.
?
Dave?
?
FYI
I ran across your Aloris milling Attachment on different site nice work?
?
On Sun, Jan 19, 2025 at 05:28 PM, OldToolmaker wrote:
Does it really matter if someone likes something. I think that is a personal opinion and not relevant to the group as a whole.
Dick
|
Does it really matter if someone likes something. I think that is a personal opinion and not relevant to the group as a whole. Dick
|
The LIKE feature is of very little value - IMHO
Here is what the User manual for says:
Using the Like featureSimilar to social media apps
and websites, 开云体育 has a feature allowing group members to indicate
that they like messages that are posted to the group. You can use
either of these methods to like a group message: - On the group’s website, click the Like?icon at the bottom of the message.
- By email, reply to the message you want to like and enter either +1?or the word like?as
the text of your reply. (If your reply quotes the message you are
replying to, delete all the quoted text so your reply contains only +1?or like.)
This
reply will not be sent to group members or appear in the message
archive on the group’s website, but your like will be included in the
count next to that message’s Like icon on the website.
So - only if you look at the message on the site will you see the like count. In searching the last 700 messages, I never saw more than 1 person liking on any message.
A more important feature, again IMHO, is the Mute This Topic link that you will see at the bottom of the message.
??? As far as I can tell the like button only shows up if yer
reading messages from the groups page on , not in
standard email format either .
animal
On 1/5/25 11:03 PM, Tony Smith via
wrote:
Yeah,
I figured that might have been that case, but it doesn’t
show up for me.? Oh no, what a shame.
?
Tony
?
?
?
It’s on the web version of the forum…which
I never, ever use because this is a mailing list! 8-)
![]()
?
Huh, apparently I’ve been signed
up to Facebook or Twitter or whatever without me
noticing.
On some groups I on there
times the thread is off subject. Some times the
other groups will month before something on
subject comes up it keeps a a live
I do not know a way put a
second thread to keep everyone happy.??
?
"Wherever
you go, there you are." B. Banzai, PhD
?
Attachments:
--
Buffalo John
|
??? As far as I can tell the like button only shows up if yer
reading messages from the groups page on groups.io , not in
standard email format either .
animal
On 1/5/25 11:03 PM, Tony Smith via
groups.io wrote:
toggle quoted message
Show quoted text
Yeah,
I figured that might have been that case, but it doesn’t
show up for me.? Oh no, what a shame.
?
Tony
?
?
?
It’s on the web version of the forum…which
I never, ever use because this is a mailing list! 8-)
?
Huh, apparently I’ve been signed
up to Facebook or Twitter or whatever without me
noticing.
On some groups I on there
times the thread is off subject. Some times the
other groups will month before something on
subject comes up it keeps a a live
I do not know a way put a
second thread to keep everyone happy.??
?
"Wherever
you go, there you are." B. Banzai, PhD
?
Attachments:
|
??? In alot of my other groups of the title says OT we know it's
a off topic subject .
??? animal
On 1/6/25 10:34 AM, davesmith1800
wrote:
toggle quoted message
Show quoted text
I like ??
?
I like using?OFF SUBJECT?in first part
title. So any one looking at the updates any do not want to read
off subject they can just skip it and goto next line.?
?
The balance act for Moderator is?
1) Now getting a lot off subject the moderator I start to
brings back subject. 2) At same if no question ? on lathes.
Then you let go for better days. Waiting for lathe questions to
keep group living.?
?
Dave?
?
FYI
On some old Yahoo groups you some questioning on a lathe
sites that milling was off subject.? The other a it was not the
right model of lathe.?
?
On Mon, Jan 6, 2025 at 02:27 AM, Tony Smith wrote:
Yeah, I figured
that might have been that case, but it doesn’t show up
for me.? Oh no, what a shame.
?
Tony
?
?
?
It’s on the
web version of the forum…which I never, ever use because
this is a mailing list! 8-)
?
Huh,
apparently I’ve been signed up to Facebook or
Twitter or whatever without me noticing.
On some groups I on
there times the thread is off subject. Some
times the other groups will month before
something on subject comes up it keeps a a
live
I do not know a way put
a second thread to keep everyone happy.??
?
"Wherever
you go, there you are." B. Banzai, PhD
?
Attachments:
|
I like ??
?
I like using?OFF SUBJECT?in first part title. So any one looking at the updates any do not want to read off subject they can just skip it and goto next line.?
?
The balance act for Moderator is?
1) Now getting a lot off subject the moderator I start to brings back subject. 2) At same if no question ? on lathes. Then you let go for better days. Waiting for lathe questions to keep group living.?
?
Dave?
?
FYI
On some old Yahoo groups you some questioning on a lathe sites that milling was off subject.? The other a it was not the right model of lathe.?
?
On Mon, Jan 6, 2025 at 02:27 AM, Tony Smith wrote:
Yeah, I figured that might have been that case, but it doesn’t show up for me.? Oh no, what a shame.
?
Tony
?
?
?
It’s on the web version of the forum…which I never, ever use because this is a mailing list! 8-)
?
Huh, apparently I’ve been signed up to Facebook or Twitter or whatever without me noticing.
On some groups I on there times the thread is off subject. Some times the other groups will month before something on subject comes up it keeps a a live
I do not know a way put a second thread to keep everyone happy.??
?
"Wherever you go, there you are." B. Banzai, PhD
?
Attachments:
|
Yeah, I figured that might have been that case, but it doesn’t show up for me.? Oh no, what a shame. ? Tony ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Bruce J via groups.io
Sent: Monday, 6 January 2025 3:13 AM
To: [email protected]
Subject: Re: [7x12MiniLathe] ANSWER TO GUIDE RULE? It’s on the web version of the forum…which I never, ever use because this is a mailing list! 8-)
? Huh, apparently I’ve been signed up to Facebook or Twitter or whatever without me noticing. On some groups I on there times the thread is off subject. Some times the other groups will month before something on subject comes up it keeps a a live I do not know a way put a second thread to keep everyone happy.??
? "Wherever you go, there you are." B. Banzai, PhD ? Attachments:
|
Yeah, I figured that might have been that case, but it doesn’t show up for me.? Oh no, what a shame. ? Tony ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Bruce J via groups.io
Sent: Monday, 6 January 2025 3:13 AM
To: [email protected]
Subject: Re: [7x12MiniLathe] ANSWER TO GUIDE RULE? It’s on the web version of the forum…which I never, ever use because this is a mailing list! 8-)
? Huh, apparently I’ve been signed up to Facebook or Twitter or whatever without me noticing. On some groups I on there times the thread is off subject. Some times the other groups will month before something on subject comes up it keeps a a live I do not know a way put a second thread to keep everyone happy.??
? "Wherever you go, there you are." B. Banzai, PhD ? Attachments:
|
It’s on the web version of the forum…which I never, ever use because this is a mailing list! 8-)
Like button? ? Huh, apparently I’ve been signed up to Facebook or Twitter or whatever without me noticing. ? Tony ? ? ? On some groups I on there times the thread is off subject. Some times the other groups will month before something on subject comes up it keeps a a live I do not know a way put a second thread to keep everyone happy.??
--? Bruce Johnson
"Wherever you go, there you are." B. Banzai, PhD
|
davesmith1800
OldToolmaker
BuffaloJohn